Pre-Greased Trailer Hub & Drum That Fits Lippert 3,500 lb Axle
Question:
Hello. Im looking for a greased hub for a 2021 Aluma 8115 trailer. Its a 3500# Lippert axle. Would like to have as a spare. Thanks
asked by: Earny
0
Expert Reply:
We have exactly what you need for a pre-greased hub and drum for your Lippert 3,500 lb axle. The correct part number is the following:
- Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased # AKHD-545-35-EZ-K
I did verify for you with Lippert that the # AKHD-545-35-EZ-K is the correct fit for their 3,500 lb axles.
expert reply by:
Kyle S
0
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Q&A: Parts Needed to Add Electric Brakes to a Utility Trailer with a 3500 Lbs Axle and Brake Flanges
- Q&A: Should Both Axles Have Brakes on a Tandem Axle Trailer
- Q&A: How to Read the Lippert Components Axle Description Measurements
- Shop: Hopkins Engager Push-To-Test Trailer Breakaway Kit with Built-In Battery Charger - Top Load
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Tekonsha Push-To-Test Trailer Breakaway Kit with Built-In Battery Charger - Top Load
- Shop: Buyers Products Recessed Chain Tie-Down for Trailers - Carbon Steel - 6,600 lbs
- Shop: Trunk Bike Rack
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Q&A: etrailer Hub and Drum Assembly Compatibility with Lippert 3,500 lb Axle
- Q&A: Picking Out Replacement Hub for 1996 Elite Ski Boat Trailer
- Q&A: Is Additional Grease Needed to be Pumped into Dexter Trailer Hub that is Pre-Greased
- Q&A: Replacement Pre-Greased 5 On 4-1/2" Hubs For Trailers Using L44649 Inner And Outer Bearings
- Video: Review of Dexter Trailer Hubs and Drums - Pre-Greased 3500 LB - 84546UC3-EZ
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-545-35-EZ-K
- Search Results: lubrimatic wheel bearing grease
- Search Results: 5 on 4 12 hub
- Search Results: dexter hub