Replacement Mounting Hardware for Westin R5 Nerf Bars on a 2011 Chevrolet Silverado Crew Cab

Question

Question:

I have a 2011 chevy silverado crew cab and I need help searching for mounting bracket accessories to use Westin R5 steps. What do you recommend I use?

asked by: Rick

0

Expert Reply:

The correct mounting brackets/hardware for your 2011 Chevrolet Silverado Crew Cab to use Westin R5 nerf bars is the Replacement Mounting Hardware Kit for Westin R5 5" Round Nerf Bars # 28-5103PK.

Mounting hardware is specific to both the nerf bars and the truck. The Replacement Mounting Hardware Kit for Westin R5 5" Round Nerf Bars # 28-5103PK works with the below listed nerf bars, which are confirmed to fit your 2011 Chevrolet Silverado Crew Cab (fits 1500, 2500 and 3500).

- Westin R5 Nerf Bars # 28-51030 (stainless)

- Westin R5 Nerf Bars # 28-51035 (black)

expert reply by: Scott S

0

Answer 1

I have checked with Westin Automotive, and have found that the #28-5103PK replacement hardware/bracket kit for the Westin R5 Nerf Bars #28-51030 does indeed include the adapter plates you speak of, as shown in the provided diagram. I've linked to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hey Jeremy, Typically with boat trailers the manufacturer will install hydraulic surge brakes because you don't have to worry about the water damaging wires like you would with electric brakes. That being said, if you use a heat shrink butt…

view full answer...

Answer 5

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

You do have the option to utilize the air brakes on your 2023 Freightliner Cascadia to control electric trailer brakes using the Hayes Air Actuated Trailer Brake Controller, part #HA100400C. However, we mostly recommend just using an electric brake…

view full answer...

Answer 8

You're right, the mounting bracket is unique (in a good way) for the Curt TriFlex NEXT Trailer Brake Controller #C24VV. The bracket is smaller and all you do is put the included adhesive tape on the bracket and stick it wherever you like under…

view full answer...

Answer 9

For your 2024 Nissan Frontier I recommend the Redarc Tow-Pro Liberty Brake Controller #RED24FR. I like the Liberty because it is simple, reliable, and looks great in any vehicle. The main unit installs behind the dash, so only the control knob will…

view full answer...

Answer 10

The first thing you will need for your 1999 D250 is a 4-way. The Curt T-Connector Vehicle Wiring Harness #C55317 plugs into the connection points behind your rear bumper and will allow you to power your trailer's signal lights. Once the 4-way is…

view full answer...

Answer 11

By all accounts the Curt Spectrum Trailer Brake Controller #C51170 works well and is easy to use and install on most vehicles. It is a brand new item so not a lot of feedback has come in on it. I did learn a few things though after speaking with our…

view full answer...

Answer 12

Hey Donald, the best Blue Ox weight distribution would be the pat #BXW0550 as it has a perfect tongue weight range for your 450 lb tongue weight trailer.

view full answer...