Are Mounting Dimensions Between CE Smith Fender CE19504 and Fulton F008594 the Same

Question

Question:

Does the CE19504 and the fulton 8594 have the same mounting measurements?

asked by: Stephen C

0

Expert Reply:

The mounting bracket dimensions between the CE Smith # CE19504 and the Fulton # F008594 that you referenced are both very similar. They are close enough that they would be interchangeable. The dimension on the Fulton is 30-1/4 inches whereas on the CE Smith the distance is 30-5/8 inches.

expert reply by: Jameson C

0

Answer 1

The CE Smith Single Axle Trailer fender #CE19504 is designed to be used with 14 inch trailer wheels. The mounting brackets that you will need are #CE26098G-2. These L-shaped brackets are made of galvinized steel and sold in pairs. You will need two…

view full answer...

Answer 2

I was informed by CE Smith that you will need to use the Mounting Brackets #CE26098G-2 to properly attach the CE Smith Single Axle Trailer Fenders w/ Top and Side Steps #CE19504-2.

view full answer...

Answer 3

There is a slight difference in the designs of the Fulton fender #F008584 and the CE Smith Fender #CE19504 but other than appearance there isn't a whole lot of difference. I have stood on a Fulton fender before and it did flex but it didn't…

view full answer...

Answer 4

I went out to our warehouse to take a couple measurements on the CE Smith Single Axle Trailer Fender #CE19504 that you referenced. The inside arch between the two side steps measures 30-5/8 inches long. The step itself which I believe is what you…

view full answer...

Answer 5

The CE Smith Single Axle Trailer Fender w/ Top and Side Steps - Black Plastic - 14" Wheels - Qty 1 #CE19504 is my recommendation for you. It is 43-1/8 inches long x 11 inches wide x 12-1/2 inches tall which will give you a skirt height of 11-1/2…

view full answer...

Answer 6

The CE Smith Single Axle Trailer Fender with Top and Side Steps - Black Plastic - 14" Wheels, has a mounting point that measures, from center to center, 34-1/2 inches. These fenders come in either a quantity of one or two: - Quantity of 1: CE…

view full answer...

Answer 7

The Fulton Single Axle Trailer Fender part #F008584 and CE Smith Single Axle Trailer Fender part #CE19504 are both excellent replacement trailer fender options. Unfortunately, we cannot confirm fit on any one particular make/model. They are designed…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 10

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 11

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

Answer 12

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Are Mounting Dimensions Between CE Smith Fender CE19504 and Fulton F008594 the Same

Product Page this Question was Asked From

Continue Researching