Length of Smooth Portion of Wet Bolts of MORryde Suspension Upgrade Kit MR76ZR
Question:
Hi, could you please tell me the length of the wet bolts included in this kit. Measuring the smooth area of the shoulder bolts. From just under the head, down to where the smooth part stops and the threaded part begins. Im sure theres enough threaded part on the end to accept the nut. I just need to know how much smooth shaft of the bolt is available. They list two different lengths, Im assuming the shorter ones are for attaching the fixed eyes to the spring hangers, and also for the center pivot of the equalizer. Im most interested in the length of the longer ones. Building my own trailer, and making upgraded spring hangers of matching 1/2inch thick material, want to find extra length wet-bolts that will work with my heavy-duty spring hangers. Thanks.
asked by: Ben H
Expert Reply:
The usable portion of the longer wet bolts that comes with the MORryde kit part # MR76ZR are designed to be used with a 1-3/4 inch wide leaf spring but the section of the bolt you are asking about is 2-1/4 inches wide. This is the smooth part of the bolt under the head to the threaded section.
Product Page this Question was Asked From
MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Trailer Suspension Parts
- Suspension Kits
- Boat Trailer
- Snowmobile Trailer
- 3-1/8 Inch Long
- Tandem Axle
- MORryde
more information >
Continue Researching
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Q&A: Wet Bolt Material for MORryde Suspension Upgrade Kit
- Video: Review of MORryde Trailer Leaf Spring Suspension - Spring Mounting Hardware - MR76ZR
- Q&A: How To Measure The MORryde Suspension Upgrade Kit
- Video: MORryde Tandem Axle Trailer Suspension Upgrade Kit Installation
- Video: MORryde Tandem Axle Trailer Suspension Upgrade Kit Installation - 2009 Keystone Montana Mountaineer
- Q&A: Troubleshooting Grease Only Going Through Grease Zerk and Not Into Wet Bolt On MORryde # MR76ZR
- Q&A: How To Determine Correct Wet Bolt/Shackle Upgrade Kit For Tandem Axle Trailer
- Search Results: mr46zr
- Q&A: Will MORryde Suspension Upgrade Kit w/ 3-1/2 Inch Shackles Replace 2-1/2 Inch Shackles
- Search Results: mr76zr
- Shop: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 26" Long
- Shop: MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers w/ 35" Wheelbase - 8K
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Search Results: leaf spring
- Shop: Trailer Hitch
- Article: Most Popular Wheel Bearings
- Q&A: Best Cushioned Equalizer Replacement for Equalizer that is 6 inches Wide
- Q&A: How To Measure To Make Sure The MORryde CRE3000 Equalizers Will Fit Your Trailer
- Article: How to Accurately Measure Trailer Leaf Springs
- Search Results: equalizer
- Shop: Trailer Wiring
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Shop: Suspension Enhancement
- Search Results: 25580
- Article: Trailer Wiring Diagrams
- Search Results: leaf springs
- Shop: Brake Controller
- Article: Double-Eye Trailer Suspension System Review
- Search Results: leaf spring suspension