Replacement RV Power Panel/Charger for Magnetek 6332

Question

Question:

Need to replace my Magnetek 6332. Need complete unit for breakers and inverter. Do you have complete kit?

asked by: Rod K

0

Expert Reply:

For the Magnetek 6332 converter we have replacement converter sections with the part # PD4635V or for an entirely new panel setup you'd want the Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger # PD4135K. This is a 35 amp charger setup just like what you have currently. It works with lead acid and lithium batteries too.

expert reply by: Jameson C

0

Answer 1

The Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger, #PD4135K is a suitable replacement for your Magnetek 6612 converter, providing you have at least 8 gauge wire in serviceable condition. The #PD4135K is a…

view full answer...

Answer 2

Technically the 60 Amp Progressive Dynamics RV Power Control Center #PD4560K18LS8 will work but since it's rated for twice the amount of power as your current system I recommend toning it down and going with the 35 Amp Progressive Dynamics RV…

view full answer...

Answer 3

With the Magnetek 6700 series power centers being obsolete your best option is to replace it with one like the Progressive Dynamics 4100 Series RV Converter #PD4135K.

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 6

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 7

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 8

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 9

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 10

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Answer 11

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 12

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Replacement RV Power Panel/Charger for Magnetek 6332

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching