Distance to Set Hangers of Slipper Spring Hanger Kit with Slipper Spring e67SR
Question:
I purchased the HAP-105-00 single axle hanger kit along with the 5 leaf slipper spring model sp- 160275 and I need to know at what distance I should weld the hangers center to center one to the other to accommodate for the slipper spring. Thank you!
asked by: Alex M
0
Expert Reply:
With the Slipper Spring Single Axle Hanger kit part # HAP-105-00 and the Slipper Springs part # e67SR you'd want to set the hangers at a distance of 24-1/4 inches apart.
expert reply by:
Jameson C
0
Products Referenced in This Question
5-Leaf Slipper Spring w/ Hook End for 6,000-lb Trailer Axles - 27" Long
- Trailer Leaf Springs
- Slipper Springs
- Hook End
- 6000 lbs
- 2 Inch Wide
- 5 Leaf
- 27 Inch Long
- Painted
- etrailer
more information >
Product Page this Question was Asked From
Dexter Single-Axle Trailer Hanger Kit for 2" Slipper Springs - 5" Front, 6-3/8" Rear
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- Single Axle
- Dexter
more information >
Continue Researching
- Search Results: front hanger
- Search Results: 12 equalizer
- Shop: Dexter 6-Leaf Slipper Spring for 9,000-lb Trailer Axles - 30" Long
- Shop: Dexter Single-Axle Trailer Hanger Kit for 2" Slipper Springs - 5" Front, 6-3/8" Rear
- Shop: etrailer Electric Trailer Brakes w/ Dust Shields - Self-Adjusting - 12-1/4" - Left/Right - 8K
- Shop: Dexter Tandem-Axle Trailer Equalizer Kit for 2" Slipper Springs - 23-1/2" Long Equalizers
- Shop: Equalizer for 2" Wide Slipper Springs - 23-1/2" Long - 1" Center Hole
- Shop: Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 12" Long Equalizers
- Shop: 6-Leaf Slipper Spring w/ Hook End for 8,000-lb Trailer Axles - 29-1/2" Long
- Search Results: 6 leaf slipper spring
- Search Results: hap~205~03
- Search Results: hap~105~00
- Search Results: apubr~9
- Video: Review of Dexter Trailer Leaf Spring Suspension - Hangers - Suspension Kits - HAP-105-00
- Q&A: Will Dexter 9K - 10K Hub and Drum Fit Lippert 10K Axle
- Q&A: Recommended 27 inch Leaf Spring for my Trailer
- Q&A: 27 Long Slipper Springs for a Boat Trailer
- Video: Curt Weight Distribution - WD With Sway Control - C17422 Review
- Search Results: eaz lift
- Video: Dexter Axle Trailer Brakes - Electric Drum Brakes - 23-450-451 Review
- Video: Dexter Axle Trailer Hubs and Drums - Hub with Integrated Drum - 8-430-5UC3 Review
- Q&A: Electric Drum Brake and Hub/Drum for 10K Axle
- Q&A: Trailer Slipper Spring to Replace Dexter 072-032-00 Spring
- Q&A: Recommended Slipper Spring Suspension for 10,000 Pound Trailer
- Q&A: When is Wheel Retainer Ring Needed for Dexter Hubs and Wheels
- Video: Camco Tornado 360-Degree RV Holding Tank Rinser Review
- Video: TruRyde Trailer Suspension TRSS300 Review
- Video: Ultra-Fab Products RV Wiring - Cable Hatch - UF48-979010 Review