BAKFlip Tonneau Cover Compatibility With BullRing Tie-Down Anchors For Truck Bed Stake Pockets

Question

Question:

Are these compatible with my BAKflip tonneau cover on my 2021 Ford F150 with a 6-1/2' truck bed?

asked by: Stu J

0

Expert Reply:

The BAKFlip FiberMax Hard Tonneau Cover - Folding - Aluminum and Fiberglass, part # BAK86FR, that fits your 2021 Ford F-150 with the 6-1/2' truck bed does not cover the stake pockets. Since the stake pockets are uncovered, you can use the BullRing Retractable Tie-Down Anchors for Truck Bed Stake Pockets - Flush Fit - 1,000 lbs - Qty 2l, part # BU24FR, with this vehicle.

I have included a product description link and a video review link below.

expert reply by: Mark Smith

0

Answer 1

Yes, you are going to also need the Demco Autoslide Capture Plates for Trailair Rota-Flex Pin Boxes #DM6171 when using the Demco Autoslide 5th Wheel Trailer Hitch w/ Slider #DM8550040 with your Road Armor pin box. For a suspension enhancement I…

view full answer...

Answer 2

Hello Tim. We can definitely set you up with a complete AC system with an Advent low profile unit. We currently do not offer these parts as a package, but you can purchase all of the exact same components separately. To answer your question, yes, the…

view full answer...

Answer 3

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Yes, the Curt Custom Fifth Wheel Installation Kit for Ford #C93WR will work just fine with the Demco Autoslide 5th Wheel Trailer Hitch w/ Slider #DM8550040.

view full answer...

Answer 6

The support braces in the HappiJac Truck-Mounted Camper Tie-Downs #LC182860 are going to attach to the cross frame to provide support for the anchors which will bolt through the bed wall and into the braces. The rear anchors will bolt through the…

view full answer...

Answer 7

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

The main difference between the Timbren Suspension Enhancement System #TFRTT1504E and the Timbren Rear Suspension Enhancement System #TFR1504E on your 2022 Ford F-150 is going to be the weight capacity and purpose the system is intended for. The…

view full answer...

Answer 10

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 11

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 12

I do see the BAKFlip MX4 Hard Tonneau Cover #BAK52FR you found is for a short CarbonPro bed on your 2024 GMC Sierra 1500 Denali. This will interfere with the 3rd brake light bed camera on your truck. I recommend looking at the Pace Edwards…

view full answer...