Base Plate Kit to Use Ready Brute Tow Bar with 2005 Jeep Wrangler

Question

Question:

I have a 2005 Jeep Wrangler Standard front bumper. I have a ready brutte 2 tow bar with surge brake. I need the base plate and Clevis adapters to ensure my tow bar works.

asked by: Mike C

0

Expert Reply:

Since we only have adapters for Blue Ox base plates with the Ready Brute 2 tow bars with the part # BX88297 the base plate kit you'd need for your 2005 Jeep Wrangler would be the Blue Ox # BX1124 and you'd be set.

expert reply by: Jameson C

0

Answer 1

Along with the supplemental braking system you will also need a base plate kit, wiring harness, and a charge line to keep your battery from dying. Since you have a Blue Ox tow bar you will want the Blue Ox Base Plate Kit item #BLU33FR. This kit has…

view full answer...

Answer 2

When using the Demco #DM86VR Stay-In-Play DUO braking system, you would indeed still need a taillight wiring harness like the Roadmaster #RM-15247 diode kit so the taillights on the towed vehicle work in tandem with those on the motorhome while the…

view full answer...

Answer 3

It would really depend on the mechanical experience of the installer that is installing the Stay-IN-Play Supplemental Braking System part #SM99251. It usually takes our experienced installers 8 hours to install so it is recommended to take it to a…

view full answer...

Answer 4

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 7

The B&W Companion OEM 5th Wheel Trailer Hitch #BWRVK3700 is perfectly compatible with cushioned pin boxes like your MORryde RP072-1621HD, so the clunking you're experiencing isn't related to the two components being incompatible. With…

view full answer...

Answer 8

It's totally normal for a bit of movement between any fifth wheel hitch and the base rails. The feet on the hitch are typically a bit smaller than the slots they slide into for mounting otherwise you'd have a hard time getting your hitch in…

view full answer...

Answer 9

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 10

I checked with Curt and they do show the Curt Trailer Hitch Receiver part #C13233 as a fit for a 2022 Volvo XC90 All Models which includes the Recharge.

view full answer...

Answer 11

Gladly! The difference between the Blue Ox Patriot 3 Radio Frequency, Portable Braking System BRK2019 and the Blue Ox Patriot Radio Frequency, Portable Braking System #BLU37TR is that the Blue Ox Patriot 3 RBRK2019 is older, no longer available, and…

view full answer...

Answer 12

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Base Plate Kit to Use Ready Brute Tow Bar with 2005 Jeep Wrangler

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching