Recommended 5th Wheel Cover for a Curt 16k 5th Wheel Slider Hitch

Question

Question:

I have Curt 16K slider hitch and rail system. I need a cover please

asked by: Todd V

0

Expert Reply:

The Classic Accessories Cover for 5th Wheel Trailer Hitch # CA80116 will work to cover your Curt 16k sliding 5th wheel hitch. I have included a couple pictures of this cover being used on other sliding 5th wheel hitches. While the cover does not quite cover 100% of the hitch and slider base, it does provide protection for the most vital areas.

expert reply by: Scott S

0

5th Wheel Hitch Cover on a B&W 5th Wheel Sliding Hitch
(click to enlarge)

5th Wheel Hitch Cover on a SuperGlide 5th Wheel Slider Hitch
(click to enlarge)

Answer 1

Yes, I checked with Curt and their 5th Wheel and Gooseneck Wiring Harness #C56000 is a confirmed fit for your 2011 Ford F250.

view full answer...

Answer 2

I pulled a Classic Accessories Cover, part #CA80116 from our warehouse and installed it over a Q20 hitch. I took a photo of it installed and as you can see in the attached photo it fits just fine. This cover has made of heavy-duty waterproof Black…

view full answer...

Answer 3

We do have a cover for your 5th wheel assembly. The Classic Accessories Cover for 5th Wheel Trailer Hitch - 24" x 24" x 18" - Black, part #CA80116, is made from heavy duty vinyl ,so it is easy to wipe down. It resists UV…

view full answer...

Answer 4

The Reese 5th Wheel Trailer Hitch Cover #RP30055 should have no problem fitting the head of your Curt 20K Fifth Wheel Hitch. The only fifth wheel hitches this cover doesn't fit are the ones that have larger heads like the Elite hitches. The…

view full answer...

Answer 5

The Reese 5th Wheel Trailer Hitch Cover, #RP30055, will fit a 15k hitch and a 20k hitch, so there should not be any fit issue with a 16k hitch. To verify, you can take some measurements and compare them to the cover which measures 18 inches long…

view full answer...

Answer 6

The Curt A16 #C16521 requires lubrication of the skid plate, center pivot point, locking pawl, jaw pivot points, and linkage pivot points. I have attached the complete maintenance schedule below for your reference.

view full answer...

Answer 7

We have actually heard from Lippert about this type of issue and they recommend replacing the 6 amp fuse with a 30 amp fuse. This should resolve the issues you're describing.

view full answer...

Answer 8

It sounds like you just need to reset the zero point. In order to do this you will need to follow the steps I have attached for you below and in the photo. If this does not fix your issue then please just let me know and I will see if we have any…

view full answer...

Answer 9

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The…

view full answer...

Answer 10

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 11

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 12

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need…

view full answer...

Recommended 5th Wheel Cover for a Curt 16k 5th Wheel Slider Hitch

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching