Recommended Truck Ladder Rack That Fits Retrax Tonneau Cover

Question

Question:

Looking sport rack with retrax

asked by: Therman A

0

Expert Reply:

It sounds like you're looking for a rack that will fit the Retrax tonneau cover on your truck. If you're looking for a low profile rack then the Rhino-Rack Vortex Crossbar System for Retrax XR Series and Mountain Top EVO-M Tonneau Covers - Black - 71" Long # RRVA180B-RRRLT600 you were looking at is a great option. This rack uses 71" crossbars and pivoting bases which help keep the crossbars level. The rack also comes with locks to keep it secure.

If you're looking for a taller rack then I would recommend the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack instead. The # Y01151-58 comes with 68" crossbars or we have the # Y01151-59 if you would prefer 78" crossbars. This ladder rack has a crossbar spread of 36" - 89" can be adjusted from 19" - 30" above the truck rails You will also need the Tonneau Cover Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Bed Ladder Racks # Y01155 for installation.

expert reply by: Robin H

0

Answer 1

Your are correct that the Yakima OverHaul HD has two lengths available for your 2020 Ram 3500 6-1/2' bed. You are also correct that the arms angle inward, but that has no effect on the length on the crossbars. Both the 68" version, part…

view full answer...

Answer 2

If you need to add a ladder rack to your 2021 GMC Sierra 1500 wit the 5-3/4 foot bed but already have a RetraxPRO MX #RT80471 installed, you are in luck! We have actually been asked this a few times as it is pretty common to want both options. With…

view full answer...

Answer 3

The Adarac Pro Series Custom Truck Bed Ladder Racks like part #A4000950 have a 500 lb weight rating and they will work just fine for a rooftop tent. The 500 lb weight rating will be the same for both stationary and moving. I agree that this would…

view full answer...

Answer 4

I do have options for you but none of the Thule TracRac Truck Bed Ladder Racks install via tracks/channels. However, I do have a very similar option for you in the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack part #Y01151-59 with the Tonneau…

view full answer...

Answer 5

I contacted our Rep at the manufacturer and they confirmed that the Retrax PowertraxPRO MX Hard Tonneau Cover, #RTX72FR which is confirmed fit for the 6-1/2' bed 2021 Ford F-150 will fit with the Yakima Overhaul Ladder Racks. We have the Yakima…

view full answer...

Answer 6

I do have some options for you but if you want to haul kayaks at one time or another, you'll need a ladder rack to extend above the height of the cab. Otherwise, your trailer would hit the kayaks if you just had them over the bed with a mid…

view full answer...

Answer 7

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 8

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 9

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 10

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 11

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 12

Yes, you are correct. In order to correctly take this measurement you will need to measure from the center of the spindle to the center of the main axle tube. I have included a picture for reference.

view full answer...

Recommended Truck Ladder Rack That Fits Retrax Tonneau Cover

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching