Replacement ZipStrips for Yakima FullBack 3 Bike Rack

Question

Question:

Hello I have a 3 Yakima bike rack 8002633 . I need replacement zip strips. What is part number please?

asked by: Sandy

0

Expert Reply:

The replacement ZipStrip for your Yakima FullBack 3 Bike Rack # Y02633 can be found on our site as part # Y55XR and this comes in a quantity of 2 - thank you for the information!

expert reply by: Jon G

0

Answer 1

As a matter of fact we do. The EcoHitch, part #306-X7350, is a fit for your 2017 Subaru Impreza and is a 2 inch hitch receiver. Like you said the hitch is going to be overrated for the vehicle so just make sure you don't overload what the Subaru…

view full answer...

Answer 2

The Yakima HalfBack 3 Bike Rack, #Y02633, will have to use the anchor mode when installed on the 2016 Honda Pilot. To switch the top straps from roof mount to anchor mode please reference the attached diagram. First at the cam buckle on the strap,…

view full answer...

Answer 3

I went ahead and confirmed with Yakima that you can definitely use the Yakima FullBack 3 #Y02633 on your 2021 Subaru Forester, but you will have a decreased bike weight capacity. That capacity is 60 pounds for 2 bikes and 90 pounds for 3 bikes. With…

view full answer...

Answer 4

The correct ZipStrip replacements for your Yakima SpareRide #Y02599 are found as part #Y55XR on our site. These are an updated version so they will be slightly longer but they will work the same as what came on your bike rack originally! The…

view full answer...

Answer 5

I have a great demonstration video that shows exactly what to do! Our expert Jon walks you through how to turn the bottom hooks of the FullBack 2 #Y02634 into the "anchor mode" at the attached video at timestamp 3:25. You simply flip the…

view full answer...

Answer 6

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 9

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 10

The installation instructions for this product are recommended for individuals who have experience winding torsion springs. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install…

view full answer...

Answer 11

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Answer 12

The Trailer Leaf Spring, 2250 lbs. 6 Leaf, item #e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to…

view full answer...

Replacement ZipStrips for Yakima FullBack 3 Bike Rack

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching