What Type of Bushing Comes with 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles
Question:
Can I add a grease bolt to this? Is the sleeve of bushing metal or nylon? Just want to know if I should add a bolt with grease fitting or without. Also is there anything around sleeve such as rubber/poly like a normal press in bushing. Thank you.
asked by: Mike
Expert Reply:
The bushing that comes with the 4-Leaf Slipper Spring # SP-179275 is a nylon bushing like part # TRBU11566 so you need a standard non-grease bolt like part # 166079 for the installation. The nylon bushings are pressed in there by themselves without any specific type of sleeve.
Products Referenced in This Question
Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long
- Trailer Suspension Parts
- Suspension Bolts
- Camper
- Car Hauler
- Utility Trailer
- 9/16 Inch Diameter
- 3-1/2 Inch Long
- ABS Fasteners
more information >
Nylon Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long
- Trailer Suspension Parts
- Bushings
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- 9/16 Inch ID x 11/16 Inch OD
- 1-3/4 Inch Long
- TruRyde
more information >
Product Page this Question was Asked From
4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Trailer Leaf Springs
- Slipper Springs
- Radius End
- 2000 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 24-5/8 Inch Long
- Universal Group
more information >
Continue Researching
- Search Results: trfa916dlnz
- Q&A: Recommended Shackle Bolts for Slipper Springs
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Video: Universal Group Trailer Suspension - Leaf Spring Suspension - SP-179275 Review
- Shop: Shackle Bolt For Double-Eye Springs - 9/16" Diameter - Plain - 3" Long
- Shop: Locknut for Trailer Shackle Bolt - 9/16" Diameter
- Search Results: 2000lb axle
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Shop: Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long
- Q&A: Replacement 4-Leaf Slipper Spring Measuring 25" Long
- Shop: Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 4 on 4 - 2,000 lbs
- Shop: CE Smith U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4" Long U-Bolts - Zinc
- Video: Review of Redline Trailer Leaf Spring Suspension - Hangers - H202
- Q&A: Can Boat Trailer Replace Slipper Springs With Double Eye Springs?
- Search Results: 25580
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Q&A: Replacement Clearance Lights Needed for GLO-BRITE 122R and 122Y Lights
- Q&A: Replacement for Demco Master Cylinder 05680-C for Drum Brakes
- Search Results: dust cap
- Article: Trailer Tire Sizing
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Fifth Wheel Hitch
- Q&A: 2022 Toyota Highlander Wiring for a 7-Way Blade Connector
- Search Results: 44649
- Shop: Brake Controller
- Search Results: equalizer
- Q&A: Seal With Dimensions to Replace 171255UC