Trimming Roof Vent Garnish V2092SP-29

Question:

I bought the garnish for an older Jensen roof vent from etrailer. It is too long from the ceiling to the upper nesting of the trim. I need to cut an inch all around the garnish to get it to fit. What is the best way to trim this garnish?

asked by: Larry

Expert Reply:

If the inner lip of the garnish is too long, I would recommend marking it where it needs to be trimmed and using something like a rotary cutoff tool. Make sure you have the garnish secured so that it does not move around when trimming. The edges will be sharp after trimming the garnish so I would suggest using sandpaper to smooth the edges that have been trimmed.

expert reply by: Jeffrey L