How To Program the Comination for the Trimax 1-1/4 Solid Brass Padlock # TMX83FR
Question:
Good afternoon, I rent several storage lockers, and want a bunch of these locks with the same combination. I see that the combination can be changed, but how exactly is that done? Thanks!
asked by: Neil Z
Expert Reply:
When you first receiver your Trimax 1-1/4" Solid Brass Resettable Combination Padlock # TMX83FR the combination is factory set to 0-0-0-0. You will simply turn the combination to pins to this and press the shackle down to open.
To set/reset you combination you will need the lock to be open, and then you will insert the included reset key into the side of the lock and rotate 90 degrees in either direction. With the key rotated you will then be able to set the combination to your choice. With the combination set you can release the key and remove from the lock. The lock will now be set to the new combination. Be sure to scramble the code and test the lock to ensure it is set properly.
Product Page this Question was Asked From
Trimax Combination Padlock - 1-1/4" Wide - 5/16" Shackle
- Padlocks
- Universal Application Padlock
- Combination Lock
- Brass and Steel
- 5/16 Inch Diameter
- Trimax Locks
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Replacing The Zerk Fitting On A Dexter EZ-Lube Trailer Axle
- Q&A: Retaining Nut For Dexter Hub & Drum 5,200 lb - 6,000 lb Part 8-201-9UC3-EZ
- Q&A: Solution for Zerk Fitting of EZ Lube Spindle Wearing Out Rubber Cover
- Q&A: Are E-Z Lube Grease Zerks Threaded or Pressed In
- Q&A: Timken Bearing Kit Fitment for a 3,500 lb Axle
- Article: How to Rent an RV
- Q&A: Options For RV Slide-Out Tray Assemblies
- Q&A: Tips for Difficult to See Furrion Vision S Screen of Monitor
- Article: How to Carry Bikes While Towing a Travel Trailer
- Article: How to Charge a Trailer Battery While Driving: 3 Common Problems (And How to Fix Them)
- Article: Brake Controller Installation: Starting from Scratch
- Article: What Exactly is Tongue Weight?