Will the Hollywood Racks RV Rider Bike Rack for 2 Electric Bikes Work with Lectric E-Bike

Question

Question:

Can we put large bikes that step-through womens bikes on this rack? Also is it okay if the center bar is large since it will maybe contain the battery?

asked by: Michael L

0

Expert Reply:

The Hollywood Racks RV Rider Bike Rack for 2 Electric Bikes part # HLY64FR can only accommodate bike frames up to 2" diameter so if your bike has a larger frame you'll need an adapter like the Hollywood Racks Bike Frame Adapter Bar part # HRBA-PRO. The adapter bar also works great for bikes with a deep drop tube frame.

expert reply by: Conner L

0

Answer 1

For a great platform bike rack that works with your 2 Lectric XP 2.0 step-thru bikes on your 2011 Forest River 32foot Class C Sunseeker Motorhome, I recommend the Hollywood Racks RV Rider Bike Rack for 2 Electric Bikes - 2" Hitches item…

view full answer...

Answer 2

The Curt RV trailer hitch, #13703, is adjustable to fit frames measuring 22 inches to 72 inches apart so your 68.5 inch frame width is within that range. I have included a link to the installation instructions for you to view. I have also included…

view full answer...

Answer 3

I attached a set of installation instructions for the Curt Hitch part #13703 that you referenced to the right plus a link to an installation video for you to check out as well.

view full answer...

Answer 4

You can order the hardware kit for the Curt hitch part #13703 with the part number #RHK.

view full answer...

Answer 5

I have the perfect bike rack option in the Hollywood Racks RV Rider Bike Platform Rack part #HLY64FR which has an 80 lb per bike weight capacity and can be used with a 2-1/2" hitch if you obtain the Hollywood Racks Hitch Receiver Reducer Sleeve…

view full answer...

Answer 6

I believe you are talking about the Hollywood Racks Hitch Receiver Reducer #HRHA-2. This is specifically designed to use with a Hollywood Bike Rack like the #HR1400Z. Since you're looking for a 2-1/2" to 2" reducer I'm assuming you…

view full answer...

Answer 7

Yes, so long as your trailer has a 2-1/2 inch receiver, you can use the Hollywood Racks Hitch Receiver Reducer Sleeve - 2-1/2" to 2" #HRHA-2. Just keep in mind this is designed only to work with bike racks that fit 2 inch hitches such as…

view full answer...

Answer 8

The Hollywood Racks RV Rider #HLY64FR has a frame clamp design that was intended for use with step through style bike frame like what your Aventon Adventure bikes have so this rack would work perfect for you. I attached a picture that shows this…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 11

My contact at Yates Rubber advises that a nominal 8-inch keel roller does not measure exactly 8 inches; typically they are slightly smaller than the specified size, much the way a piece of 2 x 4 lumber is not exactly 2-inches by 4-inches. I took…

view full answer...

Answer 12

I have added a photo detailing the wiring connections for the Pollack Heavy-Duty, 7-Pole, Round Pin conncetor, #PK11700, see link. This is a SAE J560 compliant connector. The wiring diagram for the vehicle side connector, #PK11720, is pictured also.…

view full answer...

Will the Hollywood Racks RV Rider Bike Rack for 2 Electric Bikes Work with Lectric E-Bike

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching