Will MORryde Suspension Upgrade Kit # MR58ZR Fit 2020 Passport 240BH
Question:
Ive got excess wear on the inside of my tires on one side of my 2020 Passport 240BH. It has probably 60,000 miles so I dont think its an serious problem, but I was doing some upgrades before we start rolling again this summer. I am going to check/clean the brakes and grease the axles as well as replace the tires. I was thinking an upgrade to the factory suspension would be a good idea as well. Will this kit fit? I am going to double check, but Im almost positive the shackles are 2.25. Are the factory leaf springs pretty standard? I know the current suspension is Dexter and the equalizer bolt spacing is 15. Thank you for any guidance.
asked by: Steve D
Helpful Expert Reply:
Yes, the MORryde Suspension Upgrade Kit part # MR58ZR that you referenced would fit and work great on your 2020 Passport 240BH. This would be the same size as what you have and would be an upgrade in shackle thickness than what you have now. The bushings and bolts are all the correct size as well.
Product Page this Question was Asked From
MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track - 2-1/4" Shackle Straps
- Trailer Suspension Parts
- Suspension Kits
- Boat Trailer
- Snowmobile Trailer
- 2-1/4 Inch Long
- Tandem Axle
- MORryde
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: MORryde 14-3/4" Shock Absorbing Equalizers for Tandem Axle Trailers w/ 42" Wheelbase - 8K
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Shop: 2-1/2" Lubed Dust Cap and Rubber Plug - 2.45" x 1.52" x 1.18" - Qty 1
- Q&A: Replacement Dust Cap and Plug for Lippert Axle
- Shop: U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts
- Shop: Dexstar Steel Spoke Trailer Wheel - 15" x 6" Rim - 6 on 5-1/2 - Silver Powder Coat
- Article: How to Measure a Trailer Axle
- Q&A: What Part Can I Use to Avoid Bottoming Out on My Travel Trailer?
- Shop: Suspension Enhancement
- Shop: Timbren Rear Suspension Enhancement System
- Shop: Timbren Active Off-Road Bumpstops - Rear Suspension - 7,000 lbs
- Video: Timbren Active Off-Road Rear Bumpstops Review
- Search Results: timbren
- Q&A: Which Timbren Rear Suspension Enhancement for 2008 Dodge Ram 1500 Quad Cab 2WD
- Shop: Grille Guard
- Shop: Roof Rack
- Q&A: MORryde X-Factor Crossmember that Fits MORryde CRE3000 Trailer Suspension
- Q&A: Can I Use the 2-1/4 MORryde Suspension Kit # MR58ZR without Critically Changing Trailer Setup?
- Q&A: Why is There Some Play In Trailer Suspension When Installed
- Search Results: morryde
- Video: MORryde Standard Frame Hanger X-Factor Crossmember Review
- Video: Review of RV Ride Control Trailer Leaf Spring Suspension - Alignment and Lift Kits - RR23QX
- Shop: Trailer Wiring
- Search Results: morryde x factor
- Search Results: cre4000
- Search Results: sre4000
- Search Results: x factor
- Search Results: tandem axle equalizer
- Q&A: Replacement Shackle/Wet Bolt Kit for MORryde CRE/3000 Axle
- Video: Review of MORryde Trailer Leaf Spring Suspension - Spring Mounting Hardware - MR46ZR