Compatibility of Andersen Ultimate 5th Wheel Connection Hitch with Trail Air Air Ride Pin Box

Question

Question:

I have a 2021 artic fox 291rl and i use the anderson ball hitch, would this work with that as i have a short box f350 and dont want to put a hitch in the truck bed for ease of removal?

asked by: Ron S

0

Expert Reply:

As long as your existing pin box is a Lippert 0719, the 3220 Andersen Ultimate 5th wheel connection hitch will be compatible with the # LC179879 Trailair Air Ride pin box.

expert reply by: Mike L

0

Answer 1

The Flex Air pin boxes are really nice but they aren't available for every pin box yet. The closest thing we offer is the Trailair part #LC155943 which is a fit for the 1116 pin box you have.

view full answer...

Answer 2

The 1621 and 1621HD OEM pin box both have the same bolt pattern, so since your 5th wheel will max out at 14K, you can certainly use the 18K Trail Air Flex Air, part #LC328492. According to Lippert, when the Trail Air Flex Air is fully inflated, the…

view full answer...

Answer 3

Because the FlexAir pin boxes have a part that pivots it should not be used with the Anderson Ultimate 5th wheel connection. You can however use the Trailair equivalent which is #LC158778 for the Lippert 1621 pin boxes.

view full answer...

Answer 4

I just got off the phone with Edge Performance and the Edge Juice Cs2 Performance Tuner #EP31407 along with any other product they make will not touch any emission codes. So they cannot help you delete the DEF on your 2017 Ram 3500 nor can they…

view full answer...

Answer 5

That's a good question, so I contacted Roadmaster regarding the fit of the Roadmaster Rear Anti-Sway Bar #RM-1129-144. They told me that yes, this bar will fit your 2018 Ram 3500 with factory air suspension as the brackets for mounting the bar…

view full answer...

Answer 6

You can use an Air Ride like #LC158778 with the with the Andersen Ultimate Connection 5th Wheel Trailer Hitch System with Adapter #AM3200, or for a Trailair Rota-Flex pin box like #LC328330 it would need a lockout kit from Andersen in order for it to…

view full answer...

Answer 7

Yes, the Trailair pin box part #LC179879 that you referenced is compatible with Andersen Ultimate fifth wheel adapters.

view full answer...

Answer 8

I contacted Roadmaster to verify that the Rear Anti-Sway Bar, #RM73FR is a confirmed fit for the 2019 Ram 3500 be it DRW or SWR. They confirmed this part is the correct for either type.

view full answer...

Answer 9

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 10

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

The length of wire desired depends on your vehicle connection and your personal preference. You want enough slack for turning, but not so much for dragging as you mentioned. A little extra slack isn't a problem and not enough could lead to stress…

view full answer...

Compatibility of Andersen Ultimate 5th Wheel Connection Hitch with Trail Air Air Ride Pin Box

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching