Can 800 lb Spring Bars be Used With 1,000 lb Curt MV Weight Distribution
Question:
I have an existing Curt weight distribution hitch part number 17052 with 10,000 LBS rating. I traded campers and now have a 2022 Forest River Surveyor Legend with an unloaded tongue weight of 500 LBS and a unloaded GVR of 5000 LBS. Will i need to down size my spring bars to a lighter weight bar? The camper has a high cargo capacity of around 3000 LBS but i will probably never have that much weight in it but want to make sure I have the right set up. If a replacement bar is needed do you have ones that will work with my existing hitch head. Thanks
asked by: Nathan D
Expert Reply:
So long as the total tongue weight of your fully loaded 2022 Forest River Surveyor is between 600 lbs and 800 lbs, you can use the lower rated spring bars with the hitch head of your Curt MV Weight Distribution System - Round Bar - 10,000 lbs GTW, 1,000 lbs TW # C17052. The MV systems all use the same hitch head, which is why different rated spring bars are compatible.
Having said that, without knowing your loaded tongue weight, it's impossible for me to know specifically if new bars are going to be required. If your loaded tongue weight remains between 800 lbs and 1,000 lbs you will NOT need new spring bars. But you WILL need them if the loaded tongue weight on your new trailer is between 600 lbs and 800 lbs. The correct replacement bar is the following:
- Replacement Spring Bar for Curt MV Weight Distribution System - 800 lbs TW # C17072
Products Referenced in This Question
Replacement Spring Bar for Curt MV Weight Distribution System - 800 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Spring Bars
- 800 lbs TW
- Round Bar
- MV
- CURT
more information >
Product Page this Question was Asked From
Curt MV Weight Distribution System - Round Bar - 10,000 lbs GTW, 1,000 lbs TW
- Weight Distribution Hitch
- WD Only
- No Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- 900 lbs
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Curt MV Weight Distribution System w/ Friction Sway Control - Round Bar - 14K GTW, 1.4K TW
- Shop: Curt MV Weight Distribution System - Round Bar - 10,000 lbs GTW, 1,000 lbs TW
- Shop: Curt MV Weight Distribution System - Round Bar - 6,000 lbs GTW, 600 lbs TW
- Shop: Replacement Spring Bar for Curt MV Weight Distribution System - 800 lbs TW
- Shop: Curt MV Weight Distribution System - Round Bar - 8,000 lbs GTW, 800 lbs TW
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Shop: Curt Friction Sway Control for Weight Distribution Systems
- Shop: Replacement Spring Bar for Curt MV Weight Distribution System - 1,400 lbs TW
- Q&A: Bar Length of Curt MV 10K Weight Distribution System
- Shop: Towing Mirrors
- Q&A: Weight Distribution Hitch for 400-600 lbs and 800-1000 lbs Tongue Weight
- Article: Determining Trailer Tongue Weight
- Q&A: Can the Curt MV 600 LB Weight Distribution System Be Upgraded
- Shop: Brake Controller
- Shop: RV Covers
- Q&A: Weight Distribution System and Pole-Tongue Adapter Recommendation for 9,500 lb Boat Trailer
- Shop: Trailer Hitch
- Shop: Cold Air Intake
- Search Results: c17063
- Search Results: friction sway bar
- Search Results: replacement weight distribution bar
- Q&A: Where on Trailer A-Frame Would Lift Brackets of Curt C15070 MV Weight Distribution Hitch Install
- Q&A: Determining Correct Hitch Ball Size for 2013 Coachmen Clipper Camper
- Q&A: Can the 10K Curt MV Weight Distribution System Be Upgraded to the 14K
- Shop: RV Antenna and Radio
- Video: Longview Custom Towing Mirrors Installation - 2015 Chevrolet Silverado 1500
- Video: Curt Weight Distribution - Sway Control Only - 17200 Review
- Search Results: curt sway control
- Search Results: curt weight distribution hitch
- Shop: Spare Tire Cover