Recommended Transmission Cooler For A 2014 Toyota Tundra 4.6 Engine

Question

Question:

Hi I have a 2014 Toyota Tundra 4.6 engine and will be towing a 4000 lbs travel trailer and was thinking of adding a transmission cooler and was looking for recommendations. Thank you

asked by: Dale F

0

Expert Reply:

When it comes to installing a transmission cooler in your 2014 Toyota Tundra with a 4.6 engine The Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient # D13502 is confirmed to fit your vehicle.

The Derale cooler prolongs life of the transmission, improves overall performance, and prevents heat-related failures. The cooler has a furnace-blazed aluminum construction.

I attached a review video link below.

expert reply by: Noah E

0

Answer 1

I would be happy to help. The Tekonsha P3 brake controller you referenced would be an excellent choice for you. The P3 is extremely easy to use, and has controls that are intuitive and simple to understand. The diagnostic feature is unique in that…

view full answer...

Answer 2

The P3 brake controller part #90195 is functionally the same brake controller as the P2 part #90885 but comes with more features and a better display screen setup. So if you prefer a simpler screen setup that has a couple letters and dots to indicate…

view full answer...

Answer 3

All you need to install the Tekonsha Prodigy P3 brake controller part #90195 in your 2014 Toyota Tundra is the correct install harness which is the part #3040-P which plugs in under the dash of the truck.

view full answer...

Answer 4

Yes, your 2016 Toyota Tundra that has a factory 7-way installed at the rear of it is pre-wired for a brake controller. To install our best selling P2 brake controller part #90885 all you would need is the install harness part #3031-P which has been…

view full answer...

Answer 5

If you are going to unhitch your tow vehicle from the camper and you have a weight distribution system on your vehicle, you will want to unhook the weight distribution from your tow vehicle. First, make sure the trailer is level and chock the tires…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 9

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 10

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 11

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 12

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Recommended Transmission Cooler For A 2014 Toyota Tundra 4.6 Engine

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching