Replacement Hardware for Fastway e2 Weight Distribution Head
Question:
Trailer is a 2017 Sonic 190VRB. GVWR 4500lbs. Hitch weight unloaded is 330lbs. Tow vehicle is a 2019 Santa Fe XL. Recently purchased the trailer and hitch used, had to modify hitch height for my vehicle. I broke one of the bolts that secures the head on the shank and washers were missing. Can this kit replace the parts for the Fastway e2 4.5k system or is there a replacement kit for the Fastway e2 4.5k. I also noticed that the top hole on the head is starting to become oval. I am presuming this is typical wear for a 5 year old system and not yet problematic. How long should the e2 system last. Thanks
asked by: Paul D
Expert Reply:
The correct replacement hardware kit for your Fastway e2 4.5k system is the Replacement Hardware Kit for Fastway e2 Weight Distribution Head # FA92-02-9600.
The Replacement Bolts for Equal-i-zer Weight Distribution Head # EQ90-02-9400 you asked about is for Equal-i-zer Weight Distribution Systems.
There is not a specific lifespan for a weight distribution system. If maintained and the system is properly rated for your towing setup, it can potentially last for a long time. Over time, the holes can wear a little. From your picture it doesn't look like yours has worn significantly.
Products Referenced in This Question
Replacement Hardware Kit for Fastway e2 Weight Distribution Head - Round and Trunnion Bar
- Accessories and Parts
- Weight Distribution Hitch
- Hardware
- e2
- Fastway
more information >
Product Page this Question was Asked From
Replacement Bolts for Equal-i-zer Weight Distribution Head - 4,000 lbs GTW
- Accessories and Parts
- Weight Distribution Hitch
- Hardware
- Bolts
- Equal-i-zer
- Equal-i-zer
more information >
Continue Researching
- Shop: Fastway e2 Weight Distribution Shank - 12" Long - 7-3/4" Rise, 5-1/4" Drop - 1.2K TW
- Video: Review of Fastway - Weight Distribution - FA92-02-9600
- Shop: Fastway e2 Weight Distribution Shank - 12" Long - 10-1/4" Rise, 5-1/2" Drop - 1.2K TW
- Shop: Fastway e2 Weight Distribution Shank - 12" Long - 6-1/2" Rise, 4" Drop - 1,200 lbs TW
- Shop: Replacement Hardware Kit for Fastway e2 Weight Distribution Head - Round and Trunnion Bar
- Shop: Equal-i-zer Weight Dist Shank - 12" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW
- Shop: Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 10,000 lbs GTW, 1,000 lbs TW
- Q&A: Recommended SuperCoils For 2021 Ram 1500 Sagging 3" When Towing Trailer
- Q&A: Measurements to Top Hole on Fastway e2 Weight Distribution Shank
- Video: Review of Fastway Weight Distribution Shank - FA92-02-4214
- Video: Review of Fastway e2 Weight Distribution Shank 2 Inch - FA92-02-4213
- Shop: Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 10" Rise/6" Drop
- Q&A: Power Draw Of The Diamond Group Charging Station When Not In Use
- Q&A: Recommended 2-1/2 Inch Equalizer Weight Distribution Shank with More Drop
- Search Results: equalizer shank
- Q&A: Replacement Shank For Fastway e2 Weight Distribution Hitch
- Q&A: Fastway E2 Weight Distribution Hitch Installation Instructions
- Q&A: Replacement Shank for MaxxTow Adjustable Tri-Ball Mount
- Video: Review of Equal-i-zer Weight Distribution Parts - Shank for 2-1/2 Inch Hitch - EQ94FR
- Shop: Trailer Hitch
- Search Results: leaf spring suspension
- Shop: Tool Box
- Shop: Vehicle Cargo Control
- Shop: Headache Rack
- Video: UWS Angled Truck Bed Toolbox Review
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: How to Install a Weight Distribution Hitch (With Pictures & Video)
- Shop: RV Camera
- Shop: Blind Spot Detection
- Search Results: hitch shanks