Replacement Retainer Nut for Yakima SwingDaddy Bike Rack Hitch Pin

Question

Question:

Hello: I own a Yakima Swing Daddy 4 bike hitch rack. The nut retainer assemply that fits into the hitch flange has gotten quite worn and I am looking to replace it. I was curious if your product Item # Y90254 will fit my rack? All of the pictures look pretty much identical to the one that I have. If this will not work, do you have a different part that will? Thank you,

asked by: Marc B

0

Expert Reply:

The correct replacement retainer nut hardware kit for an older Yakima Swingdaddy is the part # Y8890185.

expert reply by: Jameson C

0

Answer 1

I measured the bolt that is included in the Yakima Replacement parts kit #Y8780022 and found it has the following dimensions: Overall Length 4-5/8 Hex Head Size 13/16 Thread diameter 1/2 Length of Thread 2-1/2 I prepared a photo with these dimensions…

view full answer...

Answer 2

I measured the Replacement Nut Retainer and Nut #Y90254 and have an included diagram with everything you will need. I will also mention that this is designed for use with the Yakima HoldUp bike rack with a 2" shank, like the #Y02443. The…

view full answer...

Answer 3

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 4

The Replacement Amber Lens for MC32AB Trailer Lights #A32AB is a direct replacement for the SAE A P2 DOT 14 and would be what you'd need.

view full answer...

Answer 5

As far as height adjustability and weight capacities the Curt Q20 #C16130 and the Curt A20 #C16140 are identical. They both have a Gross Towing Weight of 20,000 lbs, a Vertical Load Limit of 5,000 lbs, and a height range of 13-17 inches. When it…

view full answer...

Answer 6

Yes, the best option we can offer you to add fuel capacity is with the DeeZee Truck Bed Auxiliary Tank part #DZ91752X which should fit in the space you have between the cab and 5th wheel hitch no problem as it is only 9" deep. I don't have…

view full answer...

Answer 7

To determine which brake assemblies would be needed, you will need to measure your existing brake drums as shown in the provided photo. Since your trailer has a 14,000 lb capacity, you most likely have tandem 7,000 lb axles, which typically use a…

view full answer...

Replacement Retainer Nut for Yakima SwingDaddy Bike Rack Hitch Pin

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching