Steering Stabilizer Recommendation for 2017 Thor ACE 30.2

Question

Question:

Wondering if this would fit my motorhome and how would you compare it to a Safe-T-Plus model that seems easier to install.

asked by: Daniel W

0

Expert Reply:

For your 2017 Thor ACE 30.2 built on a F-53 chassis with an 18k GVWR the Roadmaster Exact Center Steering Stabilizer part # RM36RR is the correct fit and what you'd want. This will give you improved handling and stability of the Safe-T-Plus which was designed more as a way to prevent losing control during a tire blow out.

expert reply by: Jameson C

0

Answer 1

Yes, the Roadmaster Exact Center Steering Stabilizer with Custom Brackets for Ford F-53 Chassis, #RM36RR will have a installation instructions included. I also highly recommend the Roadmaster Anti-Sway Bars, #RM-1139-146 for the rear and,…

view full answer...

Answer 2

Yes our Roadmaster bracket kit part #RM92VR is the same as the bracket RBK29 from Roadmaster.

view full answer...

Answer 3

I don't have any reference to a Freightliner ICM chassis however, if you have a Freightliner XCM chassis which I believe is what you were referring to then the correct Roadmaster Reflex Steering Stabilizer with Mounting Brackets is part…

view full answer...

Answer 4

I recommend the Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Class A Motor Homes part #RM-RBK25-RSSA for the 18,000 lb 2020 Thor ACE 30.2 on the Ford F-53 confirmed by Roadmaster. The steering stabilizer will help to keep the…

view full answer...

Answer 5

For a front stabilizer for your 2018 Thor ACE 29.3 you'd want the part #RM-RBK22-RSSA which is a confirmed fit. For a front sway bar you'd want the part #RM-1139-148. The biggest ride quality improvement you can make to your RV though will be…

view full answer...

Answer 6

The chassis manufacturer year is the correct info to pick out the a steering stabilizer. Since you have a 2020 Ford F-53 chassis the correct steering stabilizer you'd want is the Roadmaster Exact Center part #RM36RR. This specific stabilizer fits…

view full answer...

Answer 7

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 8

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 9

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 10

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 11

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 12

The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.

view full answer...

Steering Stabilizer Recommendation for 2017 Thor ACE 30.2

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching