Replacement Hub for 2022 ShoreLandr Boat Trailer
Question:
I have the following ShoreLandr trailer is there any way to determine the correct replacement HUB Assembly pre-greased VIN Number: 1MDA5AP19NA726311 Frame: B14 Model Year: 2022 Finish: GALV. W/SILVER Mfg Date: 2021-06-08 Boat: Lund 14SS 5 Lugs
asked by: DJ
Expert Reply:
Thank you for providing that information. According to ShoreLandr your current hub uses # L44649 inner and outer bearings. That means you can use the Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased # AKIHUB-545-2-LF-2K.
However, it does look like they use a different seal with an inner diameter of 1.063". I recommend measuring your current grease seal to verify this information. If that is the case, you can still use this hub but you will need to replace the grease seal with a 450342 seal which is not something we carry. This has the same outer diameter of 1.987" so it would fit the hub but with the 1.063" inner diameter you need.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: DeeMaxx 10" Hub/Rotor Assembly - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Dexter 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Zinc - 3,500 lbs
- Shop: Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Video: Review of Counteract Wheel and Tire Cleaner - Stud Brush - CA97FR
- Video: Review of Counteract Wheel and Tire Cleaner - Stud Brush - CA47FR
- Q&A: Replacement Trailer Bearings for Shoreland’r Trailer with #84 Spindle
- Search Results: 1/2 stud
- Q&A: How to Find Correct Replacement Hubs for Shorelandr Boat Trailer
- Search Results: l68149
- Shop: Washer For 1" Spindle
- Search Results: l44610
- Search Results: l68110
- Search Results: spindle washer
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Measuring a Trailer Tire
- Search Results: 12 inch aluminum wheels
- Video: Review of Kodiak Trailer Brakes - Replacement Caliper Guide Bolt - KGBS
- Q&A: What Brake Fluid Should be Used in Surge Brake Actuators
- Q&A: What Type of Brake Fluid to Use in Dexter Surge Actuator # DX89FR
- Search Results: 4410291
- Article: How to Tell the Weight Rating of a Trailer Axle
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-K Review
- Q&A: Trailer Idler Hubs With L44649 Inner and Outer Bearings And 1-1/4 Grease Seal
- Video: Review of Performance Tool Tools - Vehicle Tools - PTW87030
- Video: Powerbuilt Tools - Vehicle Tools - ALL648591 Review
- Q&A: Replacement Pre-Greased 5 On 4-1/2" Hubs For Trailers Using L44649 Inner And Outer Bearings
- Video: Kenda Tires and Wheels - Tire with Wheel - AM31202 Review