Rear View Safety 5-Pin Connector Splice Kit Contents

Question

Question:

Is the Rear View Safety Accessories and Parts - RVS-SPK01 with one male and one female? Thanks

asked by: Lloyd B

1

Helpful Expert Reply:

The Rear View Safety Splice Kit # RVS-SPK01 contains 2 female connectors. If you are needing one male and one female connector I recommend using the Rear View Safety Camera Extension Cable # RVS-101N and cutting it so that you have one female and one male connector.

expert reply by: Bud M

1

Answer 1

The easiest way to tell if you need to upgrade your wiring is to disconnect your monitor and camera to check the connection points. You may be able to use your current wiring if you use an adapter like the Rear View Safety Splice Kit #RVS-SPK01. It…

view full answer...

Answer 2

I went ahead and contacted Voyager about this, and they told me that the Voyager RV Side Camera is only designed to work with Voyager monitors like the Replacement Voyager WiSight 2.0 Wireless RV Backup Camera Monitor #ASA27FR. This is because these…

view full answer...

Answer 3

To replace the female 5-pin connector for your RVS backup camera system we have the Rear View Safety Splice Kit #RVS-SPK01. This comes with 2 of the female connectors that have bare wires on the other end so you can cut off your current connector and…

view full answer...

Answer 4

I reviewed Winnebago documentation for 2004 model year motorhomes and some came with the option of a Jensen in-dash radio/rearview monitor system while others did have a Sony option. The best way to know what was installed on your specific RV is to…

view full answer...

Answer 5

I contacted the manufacturer in regards to your question, they informed me that the Rear View Safety Color Monitor #RVS-6139Q uses cameras with 5 pin connectors, so your Mito cameras with 6-pins would not work unless you wanted to use the Rear View…

view full answer...

Answer 6

Probably the best option we offer would be the Trailer Valet XL part #TVXL2 which is designed for exactly what you are looking to do but it doesn't do great on grass if the ground is uneven at all or wet. Without seeing your exact setup I…

view full answer...

Answer 7

Yes, the 7-Way Vehicle Power Adapter w/ Power Switch for Furrion RV Observation Camera #FR87PR will work for your 2021 Chevrolet Silverado 2500 to provide the additional power required for your Furrion Vision S RV observation camera system to…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 10

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 11

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 12

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Rear View Safety 5-Pin Connector Splice Kit Contents

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching