Correct Replacement for Schwintek IG420294X00096R

Question

Question:

My current motor in a DC geared motor. 12vdc, Part#IG420294X00096R. Do you have a replacement?

asked by: Donald J

0

Expert Reply:

The correct replacement for a Schwintek IG420294X00096R is the Lippert In-Wall RV Slide-Out Motor part # LC236575.

expert reply by: Conner L

0

Correct Replacement for Schwintek IG420294X00096R
(click to enlarge)

Answer 1

We have a Lippert Components replacement slide motor that will work with the Schwintek system. It is the Lippert In-Wall RV Slide-Out Motor #LC236575. It is a gear ratio of 300:1.

view full answer...

Answer 2

The correct replacement for your Shayang Ye ig420294x00043r slide out motor is the Lippert In-Wall RV Slide-Out Motor #LC236575 that you were looking at.

view full answer...

Answer 3

I passed on your message and picture to Lippert to try and determine what the correct replacement slide out motor you'd need and they told me you will need the #LC236575 that you referenced and that you'll have to replace both sides at the…

view full answer...

Answer 4

I recommend replacing your Carrier air conditioner with the Advent Air RV Air Conditioner w/ Air Distribution Box and Start Capacitor #ACM150C. Since Carrier moved away from RV air conditioners they no longer produce replacement parts and its best to…

view full answer...

Answer 5

While we do carry Hinges #LC95VR, Latches #295-000019, Gaskets #CS94VR and other parts for trailer doors we do not carry entire door assemblies. Based on your dimensions you will likely need to have a custom door built which you may be able to have…

view full answer...

Answer 6

We carry all sorts of RV door parts including hinges and latches that you can see on the linked pages. I included links to hinges, latches and weather-stripping like #WS1434 and vinyl trim like #CAM25103. Since trailer makers do not keep track of…

view full answer...

Answer 7

We do have the Lippert Components In-Wall RV Slide-Out Motor #LC236575; you will only need to ensure you have a LCI In-Wall Slide-Out, which is what this motor was made for. The replacement is identical to the one in your photo (thank you for that,…

view full answer...

Answer 8

I do have an option for you but all of our AC/DC Distribution Panels come with a converter. For a 50 amp service with 60 amp converter, we have the Progressive Dynamics RV Power Control Center part #PD4560K18LS8.

view full answer...

Answer 9

The Powertek PDC3009 is a very old and outdated unit so for replacement you'd be wiring up a completely new panel for which I recommend the Progressive Dynamics RV Power Control Center part #PD4135K. This panel has 5 AC branches and 7 DC fuse…

view full answer...

Answer 10

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Correct Replacement for Schwintek IG420294X00096R

Product Page this Question was Asked From

Continue Researching