Troubleshooting Beeping and Fan Stop of the MaxxAir MaxxFan Roof Vent Fan Model 6200K

Question

Question:

Our Maxx air fan 6200 order from etrailer works great on low speeds but stops and beeps after a few seconds at higher speeds. I saw this reply and wondered if it is a similar issue.

asked by: Matt

0

Expert Reply:

Yes, it does appear as if your MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat, # MA00-06200K has a control board issue. I suggest the Replacement Printed Circuit Board for MaxxAir Manual Lift RV Roof Vents, # MA10A21276K.

expert reply by: Michael R

0

Answer 1

I'll start off by saying that typically the flashing green lights on your MaxxFan #MA00-04000K means that there is some sort of voltage issue and even though when you tested you're getting what seems to be proper voltage, I would guess there…

view full answer...

Answer 2

You definitely have a circuit board issue with your MaxxFan 7000K and need to replace it with the part #MA10A21275K and you'd be set.

view full answer...

Answer 3

That is correct, the Replacement Printed Circuit Board for MaxxAir Powered Lift RV Roof Vents w/ Reversible Fan #MA10A21275K is the correct replacement for your MaxxFan Deluxe Roof Vent w/ 12v Fan, Thermostat, and Remote #MA00-07500K, and will work…

view full answer...

Answer 4

I reached out to my tech contact at MaxxFan about your MaxxFan Deluxe Roof Vent #MA00-07500K and he said the flashing and beeping shows a voltage issue. It is either too high or too low to function correctly so the unit is trying to alert you to the…

view full answer...

Answer 5

Are you having issues with a MaxxAir MaxxFan roof vent like #MA00-04000K? It could be an internal issue with the fan and it needs to be replaced. Before replacing you can check a couple of things. Is it a new install? If so make sure you have the…

view full answer...

Answer 6

Acccording to MaxxAir, you'll want to remove power from the MaxxAir #MA00-04000K fan for a minute or two, then reconnect to reboot the circuit board. In the vast majority of instances, this will fix the problem. You should also check that the fan…

view full answer...

Answer 7

If your MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat #MA00-06200K isn't properly responding to commands then the first thing to check is your power and ground. Make sure that you have a secure ground connection and check the voltage with a…

view full answer...

Answer 8

Yes, since the fan of the MaxxAir MaxxFan Mini Roof Vent w/ 12V Fan #MA00-04401M is 12 volt you could reverse the direction of the fan by reversing the polarity of the motor.

view full answer...

Answer 9

Unless the MaxxFan Deluxe Roof Vent #MA00-06200K is installed on your vehicle I wouldn't worry about a voltage regulator because the voltage will drop enough that you won't see a spike over 13.6V. If you do have the roof vent installed on…

view full answer...

Answer 10

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Troubleshooting Beeping and Fan Stop of the MaxxAir MaxxFan Roof Vent Fan Model 6200K

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching