Replacement Adjuster Hole Covers For Dexter Trailer Brake Assemblies

Question

Question:

Brake adjuster plugs for dexter brake rv system.

asked by: James W

0

Expert Reply:

It looks like you're looking for plugs that cover the adjuster holes in a trailer brake assembly, which are also referred to as mud and crud plugs. We offer # 46-7 which is sold individually or # BP10-220, sold in a quantity of 4.

Both are compatible with Dexter 7, 10 or 12 inch trailer brake assemblies.

expert reply by: Mike L

0

Answer 1

The torque values for the Replacement U-Bolt for 2-3/8" Round Axle #DX62FR are a minimum 45 and max of 70 ft lbs.

view full answer...

Answer 2

If you are referring to the torque specification for the spring eye bolt, there is not a torque spec for this bolt. The general rule is to tighten the nut for the bolt until good and tight, but not too tight to where it will bind the spring. If the…

view full answer...

Answer 3

The U-bolts of the U-Bolt Kit part #APUBR-9 are Grade 5. The torque specs for 9/16 diameter U-bolts like this is 65-95 ft lbs.

view full answer...

Answer 4

For 3,500 pound axle U-bolt kits like the Redline #APUBR-1 that use 1/2 inch hex nuts you will want to torque them down somewhere between 45 and 70 foot pounds. I have attached a great article on trailer suspension that includes this info along with…

view full answer...

Answer 5

The recommended torque for a 1/2" diameter u-bolt like the U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles part #APUBR-8 is between 45 and 70 ft lbs. If you are having issues with the tie-plates distorting at 65 ft lbs then I…

view full answer...

Answer 6

In order to replace the Advent Analog Wall Thermostat ACTH11 you'll need the Air Distribution Box w/ Wall-Mounted Thermostat for Advent Air RV Air Conditioners part #ACRG15. This is a digital style replacement which is what you'll need since…

view full answer...

Answer 7

For a pair of stabilizer jacks that would have more than enough capacity that would work well on your R-Pod I would recommend the Stromberg Carlson Trailer Scissor Jacks part #JSC-24. These have a 5k capacity per jack and would do a great job as long…

view full answer...

Answer 8

It's totally normal for a bit of movement between any fifth wheel hitch and the base rails. The feet on the hitch are typically a bit smaller than the slots they slide into for mounting otherwise you'd have a hard time getting your hitch in…

view full answer...

Answer 9

The B&W Companion OEM 5th Wheel Trailer Hitch #BWRVK3700 is perfectly compatible with cushioned pin boxes like your MORryde RP072-1621HD, so the clunking you're experiencing isn't related to the two components being incompatible. With…

view full answer...

Answer 10

Yes, you can replace your GE air conditoner with an Advent air conditioner like the Advent Air RV Air Conditioner #ACM150. Additionally, you will also need a thermostat. For that, you can use the Air Distribution Box w/ Built-In Thermostat for Advent…

view full answer...

Answer 11

It looks like all 2015 Honda Pilots come equipped with a hitch already (save for a select few). It's for that reason that none of our manufacturers made hitches for it, and why the 2016 hitches will not fit. In the middle of your back bumper, you…

view full answer...

Answer 12

All of the 2015 Honda Pilots would have a hitch installed on them from Honda. So that is one less piece of the puzzle that you would need. Since you wanted to do some towing you might be interested in etrailer ball mount kit #989900. It comes with 2…

view full answer...

Replacement Adjuster Hole Covers For Dexter Trailer Brake Assemblies

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching