Trunk Mounted Bike Rack For 2020 Honda CR-V To Carry 2 Step Through Cruiser Bikes

Question

Question:

Will this work on my Honda 2020 crv? Will I need to purchase anything else if transporting step through cruiser bikes

asked by: Kathy

0

Expert Reply:

The Saris Bones 2 Bike Rack # SA805BL will fit your 2020 Honda CR-V. It will allow you to carry 2 bikes up to 35lbs each.

You will need an adapter for your step through bikes. I recommend the Yakima Tube Top Bike Adapter Bar # Y02531 as it has the largest range of adjustment(14-1/2" to 31-1/2").

The T-One Vehicle Wiring Harness # 118741 will allow you to use Auxiliary Lights # C53201 on the back of the bikes. This will let drivers behind you have a set of lights they can see clearly since your tail lights will likely be impaired from the bikes on your CR-V.

expert reply by: Bud M

0

Answer 1

Both Yakima and Thule have a wide selection of trunk mount bike racks that are compatible with your 2006 VoIkswagen Jetta. For a Yakima bike rack, the Yakima SuperJoe Pro 2, part #Y02629, would be a good option. This is one of the best trunk bike…

view full answer...

Answer 2

Out of all of trunk mounted bike racks we have, the Thule OutWay 2-Bike Rack #TH45JV is the least likely to damage your vehicle while in transport. If I had a bike I would put this unit on my car based my experience with this product and based on…

view full answer...

Answer 3

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…

view full answer...

Answer 4

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side.…

view full answer...

Answer 5

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to…

view full answer...

Answer 6

A 4-way trailer connector will have four functions which means it will also have four wires for the exception of wishbone harnesses. These four functions are ground, tail light, right turn, and left turn. The ground function will usually be…

view full answer...

Answer 7

The Solera Gas Strut part #LC280343 is designed for Lippert-Solera branded awnings. That said, it should be able to be used with others but you'd need to verify the dimensions in order to ensure compatibility. The length for this strut will…

view full answer...

Answer 8

That is an excellent question and is asked more often than you think. Electric brakes like what come in the Electric Trailer Brake Kit #AKEBRK-2 can be submerged in water when you are loading/unloading your boat. Since water and electricity…

view full answer...

Answer 9

A 16 inch tire will not fit on a 16.5 inch wheel. You would either need to get new 16 inch wheels with the proper bolt pattern to match what the hubs require or to get your existing wheels you would need to go with 16.5 inch tires. You mentioned…

view full answer...

Answer 10

Since the discontinued MaxxAir 4700k model fits a standard 14 x 14 RV vent opening, I recommend the MaxxFan Plus Roof Vent w/ 12V Fan - 10 Speed #MA00-04500K. The MaxxFan Plus comes with a thermostat and a remote for easy temperature customization.…

view full answer...

Answer 11

We only have the products listed on our website. I just double-checked to see if there was anything matching your descripton. The 4 microwave/convection/OTR ovens are all well over your 24" wide location. One of the smallest is the Furrion…

view full answer...

Answer 12

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Trunk Mounted Bike Rack For 2020 Honda CR-V To Carry 2 Step Through Cruiser Bikes

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching