Can SmartPlug RV Power Inlet SM97FR Attach to Round Surface

Question

Question:

Hello - Im considering replacing the Furrion 30 amp power inlet on my Summit camper van with a SmartPlug Item # SM97FR. Where my current plug is installed on the outside of my Transit van theres a slight curve in the body, top to bottom. Will this create a problem for the SmartPlug install? Thanks -

asked by: Rick

0

Expert Reply:

The mounting flange of the SmartPlug RV Power Inlet # SM97FR is flat which means it was designed to mount to a flat surface. To accommodate the roundness of where you plan to mount this you could use washers to take up the extra space.

expert reply by: Jameson C

0

Answer 1

Since the issue appears to be on the vehicle side for your 2017 Toyota Tacoma, I recommend first checking the connector itself. Look to see if there is any dirt or corrosion built up inside the connector that may preventing a solid connection with…

view full answer...

Answer 2

The best way to determine the weight capacity of your leaf springs would be to check the weight rating of the axle on your trailer. The trailer will have a plate or sticker on it that will list the VIN number. The weight rating of the axle should be…

view full answer...

Answer 3

Yes, the dimensions of the 30 Amp SmartPlug RV Power Inlet and Connector, found in Gray #SM87FR or White #SM77FR is as follows: Receptacle - 3.25" wide x 4.5" tall x 3.75" long (or deep) Plug - 3" wide x 3" tall x 4"…

view full answer...

Answer 4

I sure can; I have added a photo for you with the dimensions of the mounting hole for the 50 amp SmartPlug inlet and connector. This comes in your choice of three different colors, and the dimensions are the same for each: - Black: SmartPlug RV Power…

view full answer...

Answer 5

Hey Jason, I spoke with Furrion and they stated that the Furrion Chill Cube is OEM only currently and should be released to the aftermarket distributors later on this year (2024), but there is no solid date. That says to me that they're probably…

view full answer...

Answer 6

The only storage bag we currently carry that will fit the Mighty Cord RV Power Cord #A10-5036EDBK is going to be the Bulldog Winch Camo Mesh Duffle Storage Bag #BDW20388. We also offer the MORryde Manual Storage Reel #MR47RR, which you could mount in…

view full answer...

Answer 7

The "Trailer Disconnected" error message on the dash with a factory brake controller is usually related to an issue with the blue brake output wire that runs from the brake controller to the 7-Way connector. The fact that the issue remains…

view full answer...

Answer 8

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 9

Yes, your 2019 Subaru Crosstrek with a manual transmission is flat-towable. You'll need a few things to do this. First is a base plate kit. For that you'd want the Roadmaster Direct Connect kit part #RM-52927-5 which is custom fit for your…

view full answer...

Can SmartPlug RV Power Inlet SM97FR Attach to Round Surface

Product Page this Question was Asked From

Continue Researching