2022 Ford F-150 5-1/2 Foot Bed Thule TracRac SR Sliding Truck Bed Ladder Rack Fitment

Question

Question:

I would like a Thule sliding truck rack for a 2022 Ford F 150 XLT, 5 -6 bed. Do you have any?

asked by: David W

0

Expert Reply:

We have exactly what you're looking for with the Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43002XT-508 or you can use the part # TH43002XT-508EX which adds the over-the-cab cantilever for longer loads. This uses the shorter base rails for the 5-1/2' bed on your 2022 Ford F-150.

expert reply by: Jon G

0

Answer 1

In order to use the Thule TracRac SR Sliding Truck Bed Ladder Rack part #TH43002XT-508 if you have the 5-1/2' bed, part #TH43002XT-501 if you have the 6-1/2' bed, or part #TH43003XT-000 if you have the 8' bed on your 2019 Ford F-150 you…

view full answer...

Answer 2

Based on my research there seem to be numerous tonneau covers from Ford that fit a 2019 Ford F-150 with a 5'6" bed and there is no way for us to know exactly what you have or what tonneau covers those are because our products are entirely…

view full answer...

Answer 3

The best way to open up the rear stake pockets on your 2018 Ford F-150 would be to remove the rail cover, make a template out of cardboard using the stake pocket hole in the bed, then transfer that tempate to the rail cover and cut/trim accordingly.…

view full answer...

Answer 4

Tonneau covers and ladder racks often interfere with each other when they use the same mounting points on the truck. But since you have the excellent BAK Revolver cover on your 2016 F-150 you can still install a ladder rack from Thule, the TracRac SR…

view full answer...

Answer 5

The TracRac sliding ladder rack part numbers in general don't have a really wide fit application. Typically it's a pretty small year range of the exact same truck model and brand. But never between vehicle manufacturers. So a 2005 Toyota…

view full answer...

Answer 6

The Thule DockGlide #TH896 does come with T-bolt hardware that can fit into the top channels of TracRac ladder racks like the #TH27000XTB. This would make for an easy and very secure way to mount the rack onto the ladder rack bars.

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 10

Hey Michael, thanks for reaching out! The Timbren Active Off-Road Bumpstops #T28GR you installed on your 2018 Ford F-150 unfortunately have that reputation among users (although Timbren claims their systems provide a smooth ride). Because of this we…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...