Install Harness for Curt Echo in 2018 Chevy Silverado 1500

Question

Question:

What is the correct harness adapter to plug into a 2018 Chevy Silverado. Also can you please reach out to curt and ask suggest with great urgency that they make the app compatible with the the Chevy my link display system. How awesome would it be to have the app on the truck touch screen!

asked by: Stephen M

0

Expert Reply:

The correct install harness for installing the Curt Echo part # C27JR in your 2018 Chevy Silverado 1500 is the part # C51451. It would be pretty cool if the display would integrate into the dash of your truck! Hopefully that happens at some point.

expert reply by: Jameson C

0

Answer 1

I spoke with the folks at Curt regarding the issue you're experiencing. The vehicle battery wouldn't drain unless there's a power draw or a short in the wiring somewhere on the trailer. In order for both the vehicle and trailer batteries…

view full answer...

Answer 2

The 12V power circuit in an aftermarket 7-way connector like #37185 will usually be connected to the vehicle battery through a 40-amp circuit breaker like #PK54540. This installation provides for 12V power at the connector contact at all times, even…

view full answer...

Answer 3

Since your Suburban has the factory 7-way trailer connector, installing the Redarc #RED44FR Tow Pro Elite will be a 100% plug and play installation. The #331-TPH-010 harness plugs into a socket located in the junction box located behind the emergency…

view full answer...

Answer 4

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 5

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 6

The Tekonsha OEM Vehicle Wiring Harness #22121 that you referenced includes all the wiring and parts necessary to install a fully functional 7-Way connector and trailer brake controller. The included brake controller harness is compatible with and…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 9

It sounds like when the Redarc Tow-Pro Elite Brake Controller #RED44FR was installed on your 2022 Toyota Highlander that they may have damaged the brake signal wire or tied into the wrong wire. I recommend taking it either back to the shop who…

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.

view full answer...

Answer 12

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Install Harness for Curt Echo in 2018 Chevy Silverado 1500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching