Recommendations On Dock Bumpers For A Wahoo Aluminum Boat Dock

Question

Question:

Are these the dock bumpers used on a Wahoo Aluminum Boat Dock?

asked by: Ron N

0

Expert Reply:

The Jif Marine Dock Bumper - 23-1/2" Long x 10-1/4" Tall x 1-1/4" Thick - Black Plastic # JIF57VR are a universal fit and will be the exact same as what came on your Wahoo Aluminum Boat Dock. They're made out of a marine-grade plastic that is durable and UV resistant. If you want a flush mount you would also need The Jif Marine Dock Corner Bumper - 18" Long x 10-1/2" Tall - Black Plastic # JIF24VR. The hardware is not included with either parts.

I will attach a review link video below.

expert reply by: Noah E

0

Answer 1

I see no problems with you cutting the middle piece holding the Jif Marine Dock Bumper #JIF57VR together so you can have 2 separate pieces. I would just try to avoid cutting the bumpers directly so they can retain their shape.

view full answer...

Answer 2

Yes, the Jif Marine Dock Corner Bumper item #JIF87VR is compatible with the Jif Marine Dock Edging - P-Shape item #JIF56VR. They are both made of marine-grade flexible poly vinyl. I recommend securing the edging every 12" both on the top and…

view full answer...

Answer 3

Yes, we do have a longer version of the Taylor Made Dock Pro Dock Bumper - Edge Mount - 18" Long - White Vinyl item #36946082 you referenced. We have a 35 1/2" long version it is the Taylor Made Dock Pro Heavy Duty Dock Bumper item…

view full answer...

Answer 4

To install the Jif Marine Dock Bumper #JIF57VR you will want to use 1/2" diameter stainless steel screws.

view full answer...

Answer 5

Both the Timbren Rear Suspension Enhancement System #TDR1500DS and #TDR1500DQ that you referenced are designed to fit the 2011 Ram 1500, but there are a couple differences that may factor into which set will work for your specific model Ram and…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Recommendations On Dock Bumpers For A Wahoo Aluminum Boat Dock

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching