Trailer Wiring for 2021 Kia Sorento

Question

Question:

If my 2021 Kia Sorento is factory prewired what wiring kit do I need for my vehicle.

asked by: Stephen R

0

Expert Reply:

The only trailer wiring options we have for your 2021 Kia Sorento are ones like the # TK26FR which install by plugging inline with the vehicle's taillight wiring. We do not have anything that would plug into any factory wiring.

expert reply by: Jameson C

0

Answer 1

In order to tell if you have a factory tow package on your 2022 Kia Sorento, there will be tail light wiring connectors behind the rear driver's side tire. This will be on the exterior of the frame rail. In order to see these ports, you will have…

view full answer...

Answer 2

There are only hitches with 2 inch receivers like the Curt #C34ER currently available for the 2021 Kia Sorrento currently and because it's considered a mid-size SUV I don't expect them to design a 1-1/4" receiver. The powder coating that…

view full answer...

Answer 3

I recommend the etrailer Trailer Hitch Receiver #e28AR for your 2022 Kia Sorento X-Line AWD. This receiver is confirmed to fit all trim levels of your 2022 Kia Sorento. The spare tire can be retained in its original location with this receiver. The…

view full answer...

Answer 4

Although the etrailer brand #e98841 Class III hitch you'd looked at isn't a fit for the 2020 Kia Sorento, we do offer a Class III fit, part #e98843. As you can see in the linked install video which shows the #e98843 hitch being installed on a…

view full answer...

Answer 5

The Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #TK26FR uses the connection points behind your tail lights for installation. I'm not sure what the plugs are that you found located inside the rear bumper but they are…

view full answer...

Answer 6

There was a new generation Kia Sorento introduced in 2021. The Curt T-Connector Wiring Harness, part #C56332, is no longer compatible with the Kia Sorrento. The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, part #TK26FR, is the…

view full answer...

Answer 7

I do have an option for you though we don't offer any factory tow package wiring harnesses for a 2021 Kia Sorento. Instead, you will need to use one that plugs in behind the tail lights which will work whether or not you have any sort of factory…

view full answer...

Answer 8

There really won't be able to tell if your 2021 Kia Sorrento is wired for the trailer lights. If you bought the vehicle with the towing package, then the wires will be incorporated in the factory harness. Right now, there is only one plug in…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Trailer Wiring for 2021 Kia Sorento

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching