Which Thule Aeroblade Edge Roof Rack Fits 2017 Lexus RX 350 with Panoramic Roof

Question

Question:

I have a 2017 Lexus RX 350 F sport with a panoramic sunroof. I’m hoping to find an Aeroblade edge option that will work with my setup. What parts would I need?

asked by: Elisabeth

0

Expert Reply:

When it comes to your 2017 Lexus RX 350 with a panoramic sunroof, I recommend the Rhino-Rack Vortex Aero Crossbars # RRVA137B-2 and the Rhino-Rack SX Series Legs # RR37QX . They're made out of aluminum and they're silver in color. The rack can hold up to 165 pounds and the recommended crossbar spread is between 24 inches and 32 inches.

One thing that the aero bars has over the other roof racks is that they're more quiet. They have a wind diffuser technology that disrupts and redirects the air flowing over the bar, which causes it to create turbulence and a clean air release.

I have linked a installation video below that is on a different vehicle but it is the same installation.

expert reply by: Noah E

0

Answer 1

The specifications I have access to indicate that RX-350's come with flush mounted roof rails that run from front to back. You will need cross bars with towers (feet) and a fit kit for your RX-350. I recommend the Yakima #Y00421 cross bars…

view full answer...

Answer 2

I would be happy to help you find a roof rack for your 2022 Lexus RX 350. I recommend a kit from Thule that is designed specifically for your Lexus by attaching to your roof rails and it will also accommodate your panoramic glass sunroof. Fit Kit for…

view full answer...

Answer 3

If your Lexus has flush mounted rails that run back and forth on the roof, I recommend to use the Thule WingBar Evo Aluminum Crossbars part #TH711200 with the feet part #TH710601 and fit kit part #TH186044 for the 2020 Lexus RX350 F sport with…

view full answer...

Answer 4

For your 2020 Lexus RX 350 with panoramic roof, it sounds like you are referring to the flush mounted side rails. The Thule WingBar Evo Crossbars - Aluminum - Black - 47" Long - Qty 2 #TH711220, Evo Flush Rail Feet #TH710601, and Fit Kit for…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 9

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 12

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Which Thule Aeroblade Edge Roof Rack Fits 2017 Lexus RX 350 with Panoramic Roof

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching