How To Choose Correct Wall Mount TV Brackets for RV

Question

Question:

Did you make the television brackets for the 2011 Bounder R?

asked by: Dino W

0

Expert Reply:

I do have TV wall mount options for you though none are specific to any one model of RV. The MORryde Wall RV TV Mount part # MR93ZR is a great option for example and allows you to mount any TV to the wall 50 lbs or under that uses the following standard VESA patterns: 75mm x 75mm, 100mm x 100mm, 200mm x 100mm, or 200mm x 200mm.

If this won't work, I have attached a link with a list of all our tv mount options.

expert reply by: Conner L

0

Answer 1

VESA Standards require the bolt holes to be the same sizes but the larger the tv the larger the bolt pattern is. You'll typically see non VESA bolt patterns on TVs 42" and up. So while the weight will be ok on the Wall Mounting Bracket for…

view full answer...

Answer 2

Yes, the MORryde Wall RV TV Mount - Fixed item #MR28ZR has a lot of movement in it based on how you have to install it. I have linked a video and if you watch it around the 1:44 mark you will see how the top connection point between the wall mount…

view full answer...

Answer 3

In order to hook up a subwoofer to the iRV RV Stereo part #iRV34, you'll need to use an active speaker which is one that has a built-in amplifier. For this, the Furrion Indoor Enclosed Amplified Subwoofer part #FSW8P12CF is our best option which…

view full answer...

Answer 4

The rear panel of your Drive RV stereo will have number of connectors. These will include INPUTS for 12V operating power, a radio antenna and for connecting outside audio sources such as the stereo sound output from your TV which allows you to run…

view full answer...

Answer 5

I attached a picture to this page that has a wiring diagram for the Furrion Indoor Enclosed Amplified Subwoofer #FSW8P12CF that you referenced. I attached a review video for this for you to check out as well.

view full answer...

Answer 6

RV stereo manufacturers for some reason love to change the wiring harnesses between models so since you'll have to splice wires together anyway you may as well go ahead and go with another Jensen stereo since you prefer them. The closest option…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 9

If you are just looking for a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade for the Magnetek Converter Series 6300 Model 6332 that you have now.

view full answer...

Answer 10

For your Dometic DuoTherm the Advent Air Unit part #ACDOM150 would be your best option that will give you the higher BTU rating 15k and easily connects to the current wiring you have now.

view full answer...

Answer 11

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 12

The wheels for your ST215/75R14 sized tire on your 2022 Coleman Lantern 17B are 14" X 5-1/2" wheels with a 5 on 4-1/2 bolt pattern. The Karrier ST215/75R14 Radial Trailer Tire with 14" Galvanized Wheel - 5 on 4-1/2 - Load Range C, part…

view full answer...

How To Choose Correct Wall Mount TV Brackets for RV

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching