Weight Of The etrailer eDream Supreme RV Mattress e97FR

Question

Question:

What is the weight of this mattress? We have under bed strange so it needs to be light enough to lift

asked by: Michelle G

0

Expert Reply:

The etrailer eDream Supreme RV Mattress - Hybrid - 75" Long x 60" Wide - Short Queen # e97FR weighs approximately 112lbs.

expert reply by: Kevin C

0

Answer 1

We have a replacement converter section for your WF8955 with the part #PD4655V but this is not compatible with Lithium batteries. For a new converter and panel that would be compatible with lithium batteries at some point in your future you'd…

view full answer...

Answer 2

I spoke with Progressive Dynamics and they informed me that you cannot replace just the converter section and you would need a new panel, the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger part #PD4045KA. The Progressive…

view full answer...

Answer 3

The correct replacement panel for you is the Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger - 35 Amp #PD4135K. As you can see this is an 35 amp panel just like your WFCO-8735-P which means it is a safe…

view full answer...

Answer 4

Assuming your Sprinter has the factory tow package with the 7-way at the rear bumper, in addition to the #RED24FR Redarc Tow-Pro Liberty Brake Controller, you'll also need the #3063-P wiring harness and the #331-TPH-017. The connector to install…

view full answer...

Answer 5

I spoke with my contact at Pollak and he stated that the Pollak Replacement 7-Pole, RV-Style Trailer Connector Socket, #PK11893-11933 is the correct replacement part for the Pollak PA66-MD40 that you have.

view full answer...

Answer 6

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 7

What you need for your Isuzu NPR truck is a powered converter #C59236. It is compatible with incandescent and LED trailer lights. I have included a link to the installation instructions for you. This harness does require a direct connection to the…

view full answer...

Answer 8

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

Torque specs for wheel lug nuts will vary depending on the diameter of the lugs, type of lug nut and the wheel's material. The linked chart details the recommended torque for many combinations. Dexter Hub/Drum #84546UC3 has 1/2-inch studs and…

view full answer...

Answer 11

The correct lift kit to use on your Forest River R-Pod Trailer will depend on the year. If you have a post 2014 then you will need to use the Axle Riser Kit part #LC382741 for square shaped axles or part #LC270682 for diamond shaped axles as Forest…

view full answer...

Answer 12

We do carry a repair kit for the Dutton-Lainson DL-1602A trailer winch. You can use Winch Ratchet Repair Kit, #DL70455, as long as your winch was made after 1999. This kit will also fit DL1402A and DL1602ADD made after 1999.

view full answer...

Weight Of The etrailer eDream Supreme RV Mattress e97FR

Product Page this Question was Asked From

Continue Researching