Torque Values for Installation of Roadmaster Rear Anti-Sway Bar

Question

Question:

What is the torque setting for installation of the factory cross member bolts used to install the endlink bracket on RM 1139-146?

asked by: Gary M

0

Expert Reply:

Please note the attached installation instructions for the Roadmaster Rear Anti-Sway Bar, # RM-1139-146 torque values for all hardware are listed on page 4.

expert reply by: Michael R

0

Answer 1

The biggest improvement you can make in handling and stability for motorhomes built on a 2017 Ford F-53 chassis is with a rear sway bar like the part #RM-1139-146 which is correct for your motorhome and your 18k GVWR. Next up you'd want to…

view full answer...

Answer 2

Roadmaster Rear Anti-Sway Bar part #RM-1139-146 can only be installed in one orientation. It is not designed to be installed upside down. I have attached a photo of what the installation should look like.

view full answer...

Answer 3

You are definitely on the right track for helping to make your ride more comfortable when traveling in your 2018 Thor Windsport 29M. The first things we recommend to upgrade are the steering stabilizer, which you've already done with part…

view full answer...

Answer 4

For your Thor ACE 30.3 Motor coach, I recommend the Timbren Rear Suspension #TFRF53A and front suspension #TFFF53B. This will help with the stability of your coach and act as a shock absorber as well. They help reduce body roll and compensates for…

view full answer...

Answer 5

I spoke to my contact at Timbren and she emailed me a picture of a Timbren #TFRF53A with handwritten dimensions drawn on the picture. See attached picture. I attached installation instructions for this product for you to check out.

view full answer...

Answer 6

There are few items you are going to need to flat tow your 2019 Mini Cooper behind your 2020 Tiffin Wayfarer. The following is what you will need to set the vehicle up: Blue Ox Base Plate Kit Item #BX1312. This base plate is a custom fit base plate.…

view full answer...

Answer 7

The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you used a 1…

view full answer...

Answer 8

You have the etrailer SD Non-Binding Tow Bar for Roadmaster Crossbar-Style Base Plates, #e44ZR, being used on your 2007 Mini Cooper with Roadmaster EZ base plates, #521877-1 and are looking for a car guard. The Blue Ox KarGard Towed Vehicle…

view full answer...

Answer 9

Yes, the front #TFFF53B Timbren suspension enhancement are similar to the front #SSF-170-40-2 SumoSprings for your 2018 Thor ACE 30.2 Motorhome. Timbren is a little more well-known but we have received feedback from our customers that the SumoSprings…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 12

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Torque Values for Installation of Roadmaster Rear Anti-Sway Bar

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching