Trailer Valet Trailer Jack Weight Limits.

Question

Question:

Trailer Valet JXS Trailer Jack according to valet trailer support this 2000 cap jack sized with a total trailer of max 2000 lbs. Your web site state to buy a jack with a cap. that 10 to 15 of trailer wt. which would a 10,000 trailer that is a large differance

asked by: Charles G

0

Expert Reply:

The Trailer Valet JXS Trailer Jack w/ Footplate and Drill Powered Option - Side Mount - Sidewind - 2K # TV34FR has a 2,000 pound capacity.

I think the confusion is coming from the tongue weight formula.

The Trailer Valet JXS is designed to hold up the tongue of your trailer and not the ENTIRE weight of the trailer.

It is designed for tongue weights up to 2000 pounds and if a trailer has a tongue weight that is 2k then the trailer itself is probably 20,000 pounds. Would I use this to hold 20,000 pounds, NOPE. But I completely trust it to hold up a trailer tongue with 2000 pounds on it.

On their website they say it has a static rating of 2000 pounds, this just means it can support that much weight, not that the trailer has to be 2000 pounds or less.

expert reply by: David B

0

Answer 1

Yes, the Trailer Valet JXS Trailer Jack part #TV34FR will mount to a 2" wide x 3" tall trailer frame.

view full answer...

Answer 2

There is no wheel add-on specifically for the Trailer Valet JXS Trailer Jack part #TV34FR but there is a similar version of this jack with wheel, the Trailer Valet 5X Swivel Jack and Trailer Mover part #STC-V211 which is what I recommend using. This…

view full answer...

Answer 3

The Trailer Valet JXS Trailer Jack #TV34FR will come already lubricated. It is recommend to grease the internal gear system every 90 days.

view full answer...

Answer 4

We have the Gen-Y Ball Mount part #325-GH-054 which has 9-1/4 inches from the ball center to the hitch pin hole and has a 16,000 lb weight capacity. It also is a multi ball setup that has a 2 inch and 2-5/16 inch hitch ball.

view full answer...

Answer 5

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 6

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 7

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 8

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Answer 9

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 10

I checked with Curt and they do show the Curt Trailer Hitch Receiver part #C13233 as a fit for a 2022 Volvo XC90 All Models which includes the Recharge.

view full answer...

Answer 11

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 12

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Trailer Valet Trailer Jack Weight Limits.

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching