How Does the Timbren Heavy-Duty Axle-Less Trailer Suspension Mount to a Trailer Frame
Question:
I am looking at buying the timbren axleless offroad, but could you explain how the bolts mount to my 2x3 rectangle frame. Cant understand how you thread the nut on the bolt inside the 2x3 tube, or does the bolt go right through both sides of the frame.
asked by: Adam
Expert Reply:
If you have a box frame and are unable to use the hardware to install Timbren Heavy-Duty Axle-Less Trailer Suspension # ASR2KHDS03 this is another option. You would need to weld the suspension to the frame. Welding should be performed by a qualified professional.
If you do not already have hubs that would fit you can add # AKHD-545-35-EZ-K for a hub and drum assembly if you were to also add brakes. Or for an idler hub use # 84545UC1-EZ.
Products Referenced in This Question
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- EZ Lube
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 4" Lift - 4 Bolt - 2K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2000 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Recommendation for Converting Fleetwood Neon Pop-Up to Axle-Less Suspension System with Jeep Tires
- Q&A: Can Brakes Be Added to the 2K Timbren Axle-Less Trailer Suspension System
- Q&A: Adding Crossbars To A Teardrop Trailer
- Q&A: Can Oil Bath Hubs be Converted to Grease Hubs
- Q&A: Timbren Axle-Less System With 2,200 lb Capacity Compatibility With Dexter Brake and Hubs K71-511-00
- Q&A: Will Brake Assembly with 5-Bolt Mounting Pattern Fit 4-Bolt Mounting Pattern
- Q&A: What Welding is Required to Install Timbren Trailer Suspension Enhancement System
- Article: Pintle-Hitches
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Where to Position the Trailer Axle?
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Trailer Lighting Requirements
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Wiring Diagrams