What Parts do I Need to Install the Rhino Rack Dome Awning # RR32125 on the Rear of My Vehicle?  

The Rhino-Rack Dome 1300 Awning, #RR32125 is designed as a bolt-on mount that uses top channels in certain models of roof racks for attaching the L-brackets. See attached image. As is, the designed mounting hardware supplied does not match this to…

When the Rhino Rack Dome 1300 #RR32125 is packed up it's actually pretty narrow. I attached a picture that shows it attaches to a camper shell on the back of a Ford Ranger and you can see it is not any wider than the truck. I looked up the…

If the Yakima roof rack you have installed on your tear trailer has channels on top of the bars yes, the Rhino Rack Dome 1300 Awning #RR32125 would fit and work well. Or we also have the Yakima SlimShady Awning part #Y36VR which does fit your all…

Sorry, the Rhino-Rack Dome 1300 Awning - Roof Rack Mount, #RR32125, does not have color options.

The length of the case of the Rhino-Rack Dome 1300 Awning #RR32125 is the same length as the length of the awning when folded out, 55-3/4 inches.

Yes, the Side Wall for Rhino-Rack Dome Awning - 8' Long x 6-3/4' Tall Item #RR32131 is what you need for your Rhino-Rack Dome 1300 Awning - Roof Rack Mount - Bolt On - 64 Sq Ft Item #RR32125

So long as the roof rack on your tear trailer has channels on top then you can use the Rhino-Rack Dome 1300 Awning - Roof Rack Mount #RR32125. This awning will simply mount to the channels on the roof rack so it is really easy to set up. I have added…

Yes! The Rhino-Rack Dome 1300 Awning - Roof Rack Mount - Bolt On #RR32125 comes with the brackets that attach directly to Pioneer Platforms like the #RR87QX. This pioneer platform is a confirmed fit for the 2020 Volkswagen Atlas Cross Sport with…

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…