Weight of MORryde Cushioned 5th Wheel Pin Box

Question

Question:

I may have missed it but what is the actual weight of the pin box itself?

asked by: Nicholas A

0

Expert Reply:

The MORryde Cushioned 5th Wheel Pin Box for 11.5K to 14K Trailers w/ Lippert 1621HD, # MR74VR has weight of 190 lbs.

expert reply by: Michael R

0

Answer 1

The Trailair Flex Air 5th Wheel Pin Box - Lippert 1621 - 18,000 lbs, #LC328492, is compatible with all 5th Wheel Hitches but not any Gooseneck hitch adapters. It will work with the PullRite hitch you mentioned. All you need is the correct capture…

view full answer...

Answer 2

They really are very similar and interchangeable but the #MR84VR is for replacing a Lippert 1621 pin box whereas the part #MR94VR is for replacing a Trailair setup that also was for the 1621SHD.

view full answer...

Answer 3

Yes, the Trailair Flex Air 5th Wheel Pin Box #LC328492 will fit as a replacement for your Lippert 1621HD pin box. The dimensions of this will be slightly different. The king pin will stick out an additional 3.39 inches and will sit lower (causing…

view full answer...

Answer 4

The Curt Flex Air 5th Wheel Pin Box - Lippert 1621, #LC328492, and other Curt Flex Air 5th Wheel Pin Boxes are designed to be direct replacements to your current pin box. The long jaw models, medium jaw descriptors you refer to simply identify the…

view full answer...

Answer 5

To confirm whether or not you have a Lippert 1621 pin box that the Curt Flex Air 5th Wheel Pin Box #LC369535 would replace, you need to look at the stickers on the side of the pin box for that "1621" number. If you can't…

view full answer...

Answer 6

We do a couple replacement shear springs available for you that may work depending on what you're needing. For instance, we do carry the Replacement #75 Rubber Shear Spring for MORryde Trailer and RV Suspension Systems #MR96UR, which will…

view full answer...

Answer 7

The only difference between the Curt Flex Air and Lippert Trailair #LC155943 is simply just the name. Lippert purchased Curt awhile back and has been rebranding some of their products under the Curt name so as we go through stock the Lippert…

view full answer...

Answer 8

To determine if the MORryde Cushioned 5th Wheel Pin Box for 14K to 18K Trailers w/ Lippert 1621 and 1621HD #MR84VR will fit your trailer you'll need to first determine your trailer's bolt pattern. There will typically be a sticker…

view full answer...

Answer 9

It sounds like you might be looking for the Replacement #20 Rubber Shear Spring for MORryde Trailer and RV Suspension Systems #MR79UR, which is the replacement shear spring for an RS or LRE suspension. If you can specify which part you're…

view full answer...

Answer 10

The Flex Air 5th Wheel, #LC328492 is to be inflated to between 20 and 120 psi. The pressure that works best for your specific arrangement and the current load is what determines the best pressure. Trying several different pressure setting and…

view full answer...

Answer 11

The Trailair Flex Air 5th Wheel Pin Box - Lippert 1621 - 18,000lbs Item #LC328492 you linked to will replace your Lippert 1621 pin box and offer you a much smoother ride. The Internal air bag absorbs road shock and built-in shocks ensure that the…

view full answer...

Answer 12

To answer your question, the 2 inch difference is not a problem as you are going to be towing your trailer 2 inches further away from the cab of your pickup with the MoRryde pin box as opposed to the Lippert. So you are actually gaining 2…

view full answer...

Weight of MORryde Cushioned 5th Wheel Pin Box

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching