Can 7-Way Trailer Wiring Harness 30955 Fit 2018 Dodge Durango RT
Question:
hello have a 2018 dodge durango rt wold like to install hitch # dt38mr and plug 30955 however hitch showes no location to mount this plug any advice the under bumber ones have a bracket for them so may have to go that route i also have yet to confirm there is a factory round plug by back bumper. also can you recomend a brake controlller for this vehicle have yet to see if plugs for it are under dash also . but this durango has the trans cooler heavy duty cooling and load leveling shocks so i betting those plugs are there.
asked by: Eric C
Expert Reply:
Your 2018 Dodge Durango RT most likely has the tow package so to find where the connector is you'd need to look behind the rear bumper most likely on the driver side of the vehicle to find what the # 30955 needs to plug into. The Draw Tite hitch that fits your vehicle # DT38MR does not have a mounting bracket so you'd need to attach the 7-way to the lower edge of the vehicle bumper with the included hardware.
Then for a brake controller the Prodigy P2 part # 90885 is a great option that works really well and is very reliable. To install it you'd just need the part # TK93VR which plugs in under the dash of the vehicle.
Products Referenced in This Question
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV- 2"
- Trailer Hitch
- Custom Fit Hitch
- Class IV
- 900 lbs TW
- 7500 lbs GTW
- 7500 lbs WD GTW
- 2 Inch Hitch
- 1125 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Tekonsha
more information >
Product Page this Question was Asked From
Replacement Custom Multi-Tow 7-Way and 4-Way Trailer Connectors
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- 7 Round - Blade
- Hopkins
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Replacement Custom Multi-Tow 7-Way and 4-Way Trailer Connectors
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: How Much Slack Is Needed In Trailer Wire Connection To The Tow Vehicle?
- Q&A: Troubleshooting 2017 Toyota Tacoma Sending Power Only to Trailer Right Side Tail Lights
- Q&A: Replacement Trailer Hub/Drum for Part Number 2420801
- Article: Trailer Wiring Diagrams
- Q&A: What is Amperage Draw of Lippert Ground Control Leveling System # LC358590
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: How To Determine Weight Capacity of Double Eye Leaf Springs on Trailer
- Article: Brake Controller Installation: Starting from Scratch
- Article: Where to Position the Trailer Axle?
- Article: Best 2020 1/2-Ton Trucks for Towing a 5th Wheel
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)