How to Mount a Tool Box to a Thule TracRac SR Sliding Truck Bed Ladder Rack

Question

Question:

Recently ordered a TH43002Xt 501 . I wanted to k is if it’s possible to use a decked toolbox or any tool box with a mounting kit .

asked by: Alex G

0

Expert Reply:

We do have what you need to mount a tool box on your Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43002XT-501. The Toolbox Mounting Kit for Thule TracRac SR # TH25200 will allow you to mount a crossover toolbox to the base rails of your Thule TracRac sliding rack system. You will just need to confirm that the tool box you choose will fit between the base rails.

expert reply by: Scott S

0

Answer 1

In order to mount a crossover style tool box on a truck with Thule TracRac Sliding Ladder Rack you will need an adapter, the Toolbox Mounting Kit for Thule TracRac SR, Utility Rac, and G2 Sliding Ladder Racks part #TH25200. This will then allow you…

view full answer...

Answer 2

The length of the Toolbox Mounting Kit #TH25200 that you referenced is 18-1/2 inches.

view full answer...

Answer 3

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 4

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 5

The Tekonsha OEM Vehicle Wiring Harness #22121 that you referenced includes all the wiring and parts necessary to install a fully functional 7-Way connector and trailer brake controller. The included brake controller harness is compatible with and…

view full answer...

Answer 6

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Answer 7

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 8

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Answer 9

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 10

It sounds like when the Redarc Tow-Pro Elite Brake Controller #RED44FR was installed on your 2022 Toyota Highlander that they may have damaged the brake signal wire or tied into the wrong wire. I recommend taking it either back to the shop who…

view full answer...

Answer 11

Yes, the Thule TracRac SR Sliding Truck Bed Ladder Rack #TH57RV will fit your 2020 Ram 1500 with the 5'7" bed and no Ram box. Unfortunately, this rack is only available in the silver color. We do offer the TruXedo Elevate Truck Bed Rack…

view full answer...

Answer 12

Normal operating temperatures for drum brakes range from 150-400 degrees F. During certain stopping conditions the brake heat can exceed 600 degrees. The effectiveness and stopping power of the brakes is significantly reduced at these higher…

view full answer...

How to Mount a Tool Box to a Thule TracRac SR Sliding Truck Bed Ladder Rack

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching