Could Swagman XC Bike Rack be Used in Front Hitch of Sprinter

Question

Question:

We have a 2inch receiver on the front of our 2014 Winnebago Era. We think the Swagman rack would perform the task of racking a single bike well. Do you agree? Thanks

asked by: Donald P

1

Helpful Expert Reply:

Yes, you can use the Swagman XC2 part # S64650 in the front hitch of your 2014 Mercedes Sprinter and it would do a great job.

expert reply by: Jameson C

1

Answer 1

There really isn't an option to lower your hitch 6 inches and carry 400 lb motorcycle with carrier. The Roadmaster Dual Hitch Receiver Adapter, 6" Drop/Rise #RM-077-6 is the strongest option with a 400 lb tongue weight capacity that…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 8

There are some subtle difference between the Kuat Piston Pro Bike Rack for 2 Bikes #KU76ZR and the Kuat Piston Pro X Bike Rack for 2 Bikes #KU98VR. Overall the two racks are very similar, there are just some subtle differences/upgrades on the Piston…

view full answer...

Answer 9

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 10

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 11

EcoHitch does not allow their instruction manuals to be linked, so I cut out and added the most relevant portions of the installation of the EcoHitch Hidden Front Mount Trailer Hitch Receiver #306-X7352. This hitch, which is a confirmed fit for your…

view full answer...

Answer 12

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Could Swagman XC Bike Rack be Used in Front Hitch of Sprinter

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching