Replacement Motor and Fan Blade for Fan-Tastic Roof Vent 2100 Series

Question

Question:

I have a 2008 Hitchhicker II fifth wheel trailer. I includes a Fan-tastic vent. I want to replace the motor in this fan. The motor is a 2100 series motor. I need to replace this burned motor assy.

asked by: Lou

0

Expert Reply:

For Fan-Tastic RV roof vents the correct replacement motor solution is the part # FVK8017-00 for your 2100 series motor.

expert reply by: Jameson C

0

Answer 1

We've checked Fan-Tastic vent and the correct replacement motor and bracket for your 2004 4000B is the part #FVK8017-00. We had a customer with a 15 year old version of your vent come back and tell us it fit and worked well too. See attached…

view full answer...

Answer 2

Since you have a 2100 series you can use the #FVK8017-00. This will replace the bow-tie bracket, fan, and the motor on your Fan-Tastic roof vent.

view full answer...

Answer 3

Yes, the Replacement Fan Motor Assembly Kit for Fan-Tastic Vent Roof Vent Fans part #FVK8017-00 is the correct replacement fan/motor for your Fan-Tastic Vent Create-A-Breeze Model 8000.

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 7

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 8

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 9

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 10

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 11

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 12

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Replacement Motor and Fan Blade for Fan-Tastic Roof Vent 2100 Series

Product Page this Question was Asked From

Continue Researching