Recommended Battery Box For A 11.5L x 7.875W x 12H Battery

Question

Question:

I am upgrading my trailer battery with a large capacity battery that measures 11.5L x 7.875W x 12H. Are there any boxes that would work for this?

asked by: Kerry K

0

Expert Reply:

For your 11.5L x 7.875W x 12H battery I recommend the TorkLift PowerArmor Locking Battery Box # TLA7712R. This This 24-15/16" x 9-3/4" x 13" box keeps batteries safe and secure. The heavy-gauge aluminum is lightweight and rustproof and the powder coated outer frame is durable for a long lifespan. It includes hold-down straps, locking lid, access hole for wiring, and hardware. The extra space will allow for proper ventilation and give you plenty of space to connect wiring for all your trailer's needs. The locking lid will help prevent theft of your battery as well.

expert reply by: Kevin C

0

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 3

I would use a protractor, see photo, place the protractor on the edge of the inside of one side of the trailer frame and the other inside edge of the trailer frame should be parallel with the 50 degree line on the protractor. Another way to verify…

view full answer...

Answer 4

The 8-14.5 tires are an older metric size no longer used today. Therefore, you would need to replace these along with the wheels in order to update them. In order to see if we have any options for you, we'd first need to determine the bolt…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

The dimensions of a Group 27 battery are 12 inches long by 6-5/8 inches wide by 9-3/16 inches tall so for a box that can carry two of them we have the TorkLift PowerArmor Locking Battery Box #TLA7708R which has dimensions of 26-3/4" long x…

view full answer...

Answer 7

The 12v accessory pin from the 7-way would need to be connected to the battery in order to charge it so you'd first need to make sure it was actually wired that way since not every manufacturer does. That being said the trickle charge coming from…

view full answer...

Answer 8

To install the TorkLift PowerArmor Locking Battery Box #TLA7700L you'll need to use the included self-tapping screws to mount the box to your trailer tongue. You can do this either directly to your frame, using the extension brackets if they are…

view full answer...

Answer 9

I reached out to my contact at TorkLift regarding the PowerArmor Locking Battery Box #TLA7700L and he said that the only thing that really differentiates this from other boxes with regards to Lithium battery compatibility is its physical size.…

view full answer...

Answer 10

The holes on the bottom of the TorkLift PowerArmor Locking Battery Box #TLA7700L aren't necessarily designed for mounting the box and are really there to allow moisture to escape and as access holes for wiring. According to the instructions there…

view full answer...

Answer 11

Great question, lets have a look at this unit and see what we can figure out. **Commercial Grade Battery Box for Group 8D Batteries - Vented #329-HM484. *TorkLift PowerArmor Locking Battery Box - 6V and 12V Lithium Batteries - Powder Coated Aluminum…

view full answer...

Answer 12

The Northern Breeze roof vent lid replacement you need in the color white is the part #BBC0530-01! I attached a review video for this for you to check out for more info as well.

view full answer...

Recommended Battery Box For A 11.5L x 7.875W x 12H Battery

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching