Max Entry Height that Torklift GlowStep Can Be Used with for 3 and 4 Step Versions

Question

Question:

For 3-step and 4-step TorkLift GlowStep Stow Nfoot Go Scissor Steps w/ Landing Gear 1 What is the max height with fully extended landing gear? Thanks in advance

asked by: Valentina

0

Expert Reply:

For the 3 step Torklift GlowStep with Landing Gear part # TLA7833 the max entry height is 34-1/2 inches and then for the 4 step version # TLA7834 the max height is 42 inches.

expert reply by: Jameson C

0

Answer 1

I've drawn up a little diagram below displaying the dimensions of the TorkLift GlowStep Stow N' Go Mounting Bracket for Truck Bed Campers #TLA7820. If you need anything else please let me know and I'd be happy to help.

view full answer...

Answer 2

I contacted the manufacturer and they stated the height of the Torklift Landing Gears, #TLA8000, is 6 inches at its lowest setting and between 9 - 10 inches on the landing gears highest settings.

view full answer...

Answer 3

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 4

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

The squeaking noise on your trailer is probably coming from the joints in the suspension creating metal to metal friction. So, unless your original Equa-Flex Cusioned Equalizers are damaged or corroded, what will make the biggest difference is to…

view full answer...

Answer 7

For all intents and purposes, yes, the Fulton drop leg stabilizer jack SJL80300 is the same as the square leg jack you asked about: - Square Drop Leg Stabilizer Jack - 18" Travel - 2,000 lbs #SJ-R208 Different manufacturers but otherwise they…

view full answer...

Answer 8

Yes, you will need the Thule universal change key, #853-1251, to remove and install new lock cores. the change key pulls down all the tumblers so the lock can be removed or inserted. The existing lock, if present, will have to be unlocked for the…

view full answer...

Answer 9

If the two 6 volt batteries were wired in series to produce 12 volts total then a 12 volt battery would easily work as a replacement for them. If the two batteries were wired in parallel and the output voltage is 6 volts then no. I attached a diagram…

view full answer...

Answer 10

You will need the Ceiling Garnish for Fan-Tastic Vents Roof Vent #FVK1060-81 as it is specific to your Dometic Fantastic Fan 1450. The Ceiling Garnish for Ventline Roof Vent #VA0445-37 is going to have rounded corners as opposed to the square on the…

view full answer...

Answer 11

Based on the photo and information you provided, I can tell you have 12 x 2 inch Dexter brake assemblies for 5.2K axles, for which the Electric Trailer Brake Kit #AKEBRK-7-SA will be an excellent replacement. These are self-adjusting brakes so they…

view full answer...

Answer 12

The brake assemblies you have are 7k Dexter assemblies that are 12 inch by 2 inch in size. The part number #AKEBRK-7-SA will work as a great replacement set. This includes assemblies for both sides of your trailer that are self adjusting.

view full answer...

Max Entry Height that Torklift GlowStep Can Be Used with for 3 and 4 Step Versions

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching