Parts Needed To Mount The Base Rails Of A Thule TracRac SR Ladder Rack On A 2006 Toyota Tundra

Question

Question:

Hello, I am looking to mount the trac rac system onto my 2006 Toyota Tundra. I already have the whole setup but need the mounting hardware to mount the bed rails to the bed into the stake pockets. I was wondering if you sell a whole kit or it I need to buy all the pieces separately. Thanks in advance.

asked by: Chris M

0

Expert Reply:

We do not currently have a kit that will include all of the parts you'd need to mount the Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43002XT-505 to the stake pockets of your 2006 Toyota Tundra so you would have to individually piece it out.

The Replacement Hardware Kit for TracRac Sliding Ladder Rack Base Rails - Short Bed Trucks # TAHD-21501 will have the bolts and pocket nut that you need.

You'll also need the Replacement Rubber Shim for TracRac Sliding Ladder Rack Base Rails # TA8527645001 and the Replacement Hardware Kit for Thule TracRac SR Ladder Rack Base Rails # 752-186-3001 to get the expansion blocks and neoprene strips.

If you wanted to get all of the parts in one kit you would need to replace the base rail as well with the Base Rails for Thule TracRac SR Sliding Truck Bed Ladder Racks # TH21505. This would be a more expensive option but is also the most convenient.

expert reply by: Kevin C

0

Answer 1

Thule offers the strips you speak of in a replacement hardware kit, part #752-186-3001. They do not offer the strips as a separate item.

view full answer...

Answer 2

Replacement Pocket Nut for TracRac SR Sliding Ladder Rack Base Rails - Qty 1 #TA01-2100N has a threaded hole that is 3/8-16.

view full answer...

Answer 3

Yes, the adapters needed so the Thule TracRac SR is compatible with the stake pockets on your 2018 Chevy Silverado 1500 are in the 2014+ GM Base Rail Fastener Bag for Thule TracRac SR Sliding Rack #752-186-3001. This comes with some extra hardware…

view full answer...

Answer 4

The Replacement Crossbar for TracRac Ladder Racks #TAFX-30007-02 is only available in silver. According to Thule, this is an older design and black was never an option for the ladder rack that used these bars. All of the racks that come in black use…

view full answer...

Answer 5

To install the Thule TracRac Sliding Ladder Rack Uprights you have part #TH43002XT in the bed of your 2013 GMC Sierra 2500 will require you go with new base rails that fit the dimensions of your new truck as the Dodge rails won't work. So if you…

view full answer...

Answer 6

The Tonneau cover that is in the customer's pictures (see attached) is the BAKFlip F1 Hard Tonneau Cover #BAK72122. However in that same review, the customer says that the cover and the rack rub against each other. That rubbing will likely cause…

view full answer...

Answer 7

The correct hardware kit you need is going to be the Replacement Hardware Kit for TracRac SR Ladder Rack Base Rails part #752-186-3001 which works on both long and short bed models though you will have left over parts if you do have a short bed. The…

view full answer...

Answer 8

The Yakima OverHaul HD, part #Y01151-5868, that is compatible with your 2021 Toyota Tundra with the deck rail system, is compatible with some tonneau covers. The BAK tonneau covers are not compatible with these ladder racks. Instead, I recommend…

view full answer...

Answer 9

You are correct about the part you will need for the TracRac SR base rails on your short bed 2018 GMC Sierra 1500, but you'll also need another hardware kit to complete the installation, assuming you don't have it. So here is what you need: -…

view full answer...

Answer 10

The only trailer tire sensors that will work with the factory TPMS on your 2021 GMC Sierra 3500HD Denali is the GM kit 85110397 that is sold through GM. These sensors will need to replace the valve stems on your trailer wheels. I recommend staying…

view full answer...

Answer 11

Yes, the saddle part #TA8523444001 is replacement for the Cantilever extension versions of the TracRac ladder racks.

view full answer...

Answer 12

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Parts Needed To Mount The Base Rails Of A Thule TracRac SR Ladder Rack On A 2006 Toyota Tundra

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching