Base Plate and Flat Towing Components Confirmed To Fit 2020 Jeep Wrangler Rubicon With Steel Bumper

Question

Question:

Can the etrailer invisible base plate kit be installed on a Jeep Wrangler rubicon 2020 with a factory metal bumper?

asked by: Delio V

0

Expert Reply:

I recommend the Roadmaster Direct-Connect Base Plate Kit # RM-521453-5 for your 2020 Jeep Wrangler Rubicon with the factory steel bumper. This is confirmed to fit with your front bumper unlike the etrailer Invisible Base Plate Kit # e98948 that only fits Wranglers that have the factory plastic bumper.

The Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar w/ LED Lights # RM-676 are great lightweight tow bars. These come with a limited lifetime warranty and are proudly made in the USA. Pair this with the RoadMaster Nighthawk All Terrain Towing Combo Kit # RM-9284-2 and you will have all the electrical components you need to wire in your tail lights on your Jeep. Depending on the height of your receiver you may need a High-Low Adapter like the # RM-048-4 to keep the bars within 3" of level. If you have the 245/75R17 tires at factory ride height the tow bar connection points are going to sit at 16-1/4" from the ground. Compare this to the height of the receiver on your tow vehicle to determine if an adapter is needed.

I recommend the Demco SBS Stay-IN-Play DUO Supplemental Braking System # SM99251 for your Jeep. This braking system is installed on your Jeep so when you need to flat tow all you have to do is flip a switch in the Jeep. A Stop Light Switch Kit # RM-751490 is needed since your Jeep does not use a traditional brake switch. A Battery Charge Line Kit # RM-156-25 will ensure that your battery does not get drained by the braking system.

expert reply by: Bud M

0

Answer 1

To wire up your 2020 Jeep Wrangler so that it accepts the signal lights from your RV I highly recommend the Roadmaster Diode Flexo-Coil Wiring Kit #RM-15267. This will tap into the tail light circuits of the Jeep and provide you with a 6-Way to mount…

view full answer...

Answer 2

On your 2018 Jeep Wrangler, I am thrilled with the parts you ordered. The Mighty Cord Trailer Connector Adapter - 4-Way Flat to 6-Way Round - 12" Harness #A10-6034VP will give you the 12V charge line from your 7-way on your motorhome to give a…

view full answer...

Answer 3

For your Brake Buddy, the power should come from your vehicle battery to prevent a loss of power to your braking system. However, if you utilize the 12V power at your 7-way and use the Roadmaster Battery Charge Line Kit for Towed Vehicles #RM-156-25…

view full answer...

Answer 4

The #DM86VR does not come with a battery charger. You can install the #BB54FR to keep your vehicle's battery charged.

view full answer...

Answer 5

The etrailer base plate kit part #e98948 is a confirmed fit for your 2020 Jeep Wrangler and works directly with the Blue Ox tow bar part #BX4330 and would be a great setup. For lighting you can use the diode kit, #RM-15267, and not have to worry…

view full answer...

Answer 6

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 7

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 8

I would be happy to! To flat tow your 2024 GMC Canyon Denali you will need the following parts: Tow Bar and Safety Chains - Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights item #RM-676 Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit…

view full answer...

Answer 9

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 10

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 11

It's totally normal for a bit of movement between any fifth wheel hitch and the base rails. The feet on the hitch are typically a bit smaller than the slots they slide into for mounting otherwise you'd have a hard time getting your hitch in…

view full answer...

Answer 12

The B&W Companion OEM 5th Wheel Trailer Hitch #BWRVK3700 is perfectly compatible with cushioned pin boxes like your MORryde RP072-1621HD, so the clunking you're experiencing isn't related to the two components being incompatible. With…

view full answer...

Base Plate and Flat Towing Components Confirmed To Fit 2020 Jeep Wrangler Rubicon With Steel Bumper

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching