Why Would The Lippert Power Stance Work Off The Auxiliary Cord And Not The Coach Battery?
Question:
Im trying to wire up my electric jack off a blue top optima battery. It will not work when I hook it to the battery but will operate just fine from the aux cable on the tow vehicle. Question is... what is the minimum volts the jack needs to operate? Should I add a bigger gauge wire? Currently just adding on to the 10 gauge wire it came equipped with, the cable run is no longer than 8 feet total. I can still use the jack with the aux cable but I would like to be able to use the trailer battery. Thank you
asked by: Rob E
Expert Reply:
It sounds like you have one of two possible issues with the Lippert Power Stance Electric Trailer Jack # LC89VR.
First there is a fuse on the power wire that is not present on the Auxiliary Power Cord # LC79VR. Be sure to check the fuse.
The second issue to check is your ground connection. Since your trailer frame is painted as well as the jack the mounting brackets do not always make the best contact. The jack uses the frame as the ground circuit so you may need to grind off some of the paint to ensure it is making a good connection.
Products Referenced in This Question
Auxiliary Power Cord for Lippert Power Stance Electric Trailer Jack
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Cables and Cords
- Lippert
more information >
Product Page this Question was Asked From
Lippert Power Stance Electric Trailer Jack w/ 7-Way Plug - A-Frame - 18" Lift - 3,500 lbs
- Camper Jacks
- Pop Up Camper
- Teardrop Camper
- Travel Trailer
- A-Frame Jack
- Leveling Jacks
- Tongue Jack
- Steel
- 3001 - 4000 lbs
- Electric Jack
- Bolt-On
- 1 Jack
- Lippert
more information >
Continue Researching
- Shop: Lippert Power Stance Electric Trailer Jack w/ 7-Way Plug - A-Frame - 18" Lift - 3,500 lbs
- Q&A: Dimensions of Lippert Power Stance Electric Trailer Jack LC89VR
- Video: Review of Lippert Components Camper Jacks - Electric A-Frame Jack - LC89VR
- Video: Lippert Power Stance Electric Trailer Jack Review and Installation
- Search Results: trailer battery
- Q&A: Adding a Battery on an Enclosed Trailer to Power Interior Lights
- Q&A: Jack Cover for Lippert Smart Jack LC89VR
- Search Results: battery powered led interior lights
- Search Results: lippert
- Search Results: lippert power jack
- Q&A: Amps required for Power Stance Tongue Jack with Power Swap Cord
- Q&A: Troubleshooting Lack of 12V Power at 7-Way Trailer Connector on 2019 Ford F-150
- Q&A: Troubleshooting Lippert Power Jack With Working Lights But Jack Wont Raise or Lower
- Shop: CTEK MULTI US 7002 12-Volt Universal Battery Charger w/ Pulse Maintenance and Backup Power
- Shop: RV Camera
- Shop: MaxxAir II RV and Trailer Roof Vent Cover w/ EZClip - White
- Shop: MORryde RV TV Wall Mount - Swing/Swivel/Tilt - 35 lb Capacity - Steel
- Search Results: rv tv mount
- Shop: RV Covers
- Shop: Suspension Enhancement
- Shop: Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 5,000 lbs - Black
- Shop: Dometic FanTastic Ultra Breeze Trailer Roof Vent Cover - 23" x 19.5" x 10.25" - White
- Shop: MaxxAir FanMate RV and Trailer Roof Vent Cover - 26-1/2" x 18-1/8" x 10-1/4" - Black
- Video: CIPA Custom Towing Mirrors Installation - 2001 Chevrolet Silverado
- Q&A: How Do LED Lights On Lippert Power Stance Electric Trailer Jack LC89VR Turn On?
- Search Results: electric tongue jack cover
- Search Results: trailer jack cover
- Shop: Towing Mirrors
- Shop: Tailgate
- Shop: Truck Bed Tailgate Assist